Dr. Mach Mach 380 Инструкции по монтажу - Страница 7
Просмотреть онлайн или скачать pdf Инструкции по монтажу для Наружное освещение Dr. Mach Mach 380. Dr. Mach Mach 380 14 страниц. Stand lamp
Печатать страницу
Mach 380 / Mach M3 Stand model
Alc. ≤ 20 %
X
3
59520001
4. Cleaning
5. Adjusting the spring arm
4
5
Edition 10
DANGER OF INJURY!
During the transport of the stand with lamp
tip the stand for maximum 5° to avoid dan-
ger of injury!
Each delivered stand has a sticker with this
warning.
In case the stand is moved when positioning
the OT-lamp, please make sure, that all roll-
ers are moveable (brakes are loosened, no
cables in the movement range of the stand)!
The stand has a high-quality surface, which can be
cleaned with conventional cleaning agents.
Pay attention to the following during cleaning:
Never wipe over the stand with a dry cloth.
-
Only use disinfectant with less than 20% alco-
-
hol.
Height adjustment
At delivery the spring arm is set in the horizontal
position.
The vertical movement of the spring arm can be
enlarged up to 45 degrees upwards.
Attention!
Power off the on-site power supply and protect
it from being switched on again.
•
Power off the pendant system / pull out the
power plug and protect the pendant system
from being switched on again.
•
Remove the two Philips screws 4 and take off
the covers 3.
•
At the position marked X you can see the ad-
justing nut 5.
•
Adjust the nut 5 with the enclosed metal pin.
•
Mount the two covers 3 and fix them with the
two Philips screws 4.
•
Check the firm seating of the covers 3.
11.08.2004 / Bak Page 7/14
Dr. Mach
Lamps and Engineering