Electrolux # Руководство по эксплуатации и уходу - Страница 11

LED MESSAGES OR LIGHT INDICATORS DISPLAYED

BY MAIN CONTROL

CONTROLS LOCK - This feature allows the cooktop to be locked at anytime. Touch

and hold the LOCK key pad for few seconds. If the cooktop is in use it will automati-

cally shut off the cooktop to enter in the lock mode. A beep will sound and the Lock

indicator light will glow (Fig. 2). Once locked, no other displays will glow and no

Cooking Zones will activate. To turn the Controls Lock OFF, touch and hold the

LOCK key pad for few seconds. A beep will sound, the Lock indicator light will turn

OFF (Fig. 1) and the cooktop may be used normally.

COOKTOP POWER - The Cooktop POWER key pad activates the entire Cooktop.

To power the cooktop, touch and hold the POWER key pad. A beep will sound and

the Power LED will glow (See Fig. 4). The cooktop will be in a ready mode. If no

other key pads are touched the Cooktop Main POWER will turn OFF automatically.

To turn the Main Power OFF touch and hold the Main POWER key pad. A beep will

sound and the Power Indicator Light will turn OFF (See Fig. 3).

Errors Codes F XX - The control displays

digits in Main Control LED (Fig. 6) together showing an error code.

LED MESSAGES OR LIGHT INDICATORS DISPLAYED

BY COOKING ELEMENT CONTROLS

COOKING ZONE ON/OFF PAD - Each Cooking Elements have separate ON/OFF

key pads. Once the Main Power key pad has been touched to activate the cooktop,

touch the corresponding Cooking Element ON/OFF key pad once to active the

"- -"

Cooking Zone needed.

located above the key pad will glow (Fig. 8). If the corresponding + (increase) / -

(decrease) key pad is not touched, the request to turn the Cooking Element ON will

cancel and the Cooktop Main Power will turn OFF. To set a Cooking Element power

level touch the corresponding Cooking Element + (increase) or - (decrease) key

pad once. To turn OFF a Cooking Element, touch the Cooking Element ON/OFF

key pad once. The Cooking Element Indicator Light will turn OFF (Fig. 7).

Setting Surface Controls

F F F F F

in Cooking Elements LEDs (Fig. 5) and

will appear in the LED display and the indicator light

Fig. 1

Fig. 2

POWER

Fig. 3

Fig. 4

Fig. 5

Fig. 6

On/Off

Fig. 7

Fig. 8