Advanced Card Systems Ltd. eH880 Руководство по настройке - Страница 12

Просмотреть онлайн или скачать pdf Руководство по настройке для Сенсорные терминалы Advanced Card Systems Ltd. eH880. Advanced Card Systems Ltd. eH880 20 страниц. Sde

Печатать страницу

4.1.3.

Login Information

The IP can be obtained by pressing <F4> key when the demo program is running

To login and access the eh880, use console (RS232, refer to 4.2) or telnet/ssh (refer to 4.1) to login

the device. (username: root, password: cdy123)

4.2. RS232

4.2.1.

Serial Port Configuration

Connect to the device using the RS232 9 pin serial port to the female port located at the back of the

device. The male port counterpart is located at the pc. The login, if required, is till root and the

password is cdy123. Certain tools can be used to connect to the device using a serial cable;

Hyperterminal is used for Windows and Minicom for Linux.

If you connect the RS232 cable to the PC and eh880 after the eh880 powered up, press "enter" in the

terminal window to get the login prompt.

eH880 and ACR880 SDE Setup Manual

Document Title Here

Version 1.4

Figure 3:

RJ45 Cables with Jacks Connected

Signal Level

Baud Rate

Data Bit

Parity

Stop Bit

Flow Control

Document Title Here

RS232 (9 pin)

115200 bps

None

Page 12 of 20

[email protected]