Bosch Ascenta SHE4AM12U Инструкции по ремонту - Страница 23
Просмотреть онлайн или скачать pdf Инструкции по ремонту для Посудомоечная машина Bosch Ascenta SHE4AM12U. Bosch Ascenta SHE4AM12U 50 страниц.
Также для Bosch Ascenta SHE4AM12U: Инструкция по ремонту (27 страниц)
Печатать страницу
6. Slide dishwasher out completely (below).
5.1.5
Bottom access
The water inlet valve (1), drain pump (3), terminal box (4), float
(5), heat pump (6) and aqua sensor (7) are accessible from the
bottom front of the dishwasher. Many parts can be accessed
from the front without flipping the dishwasher upside-down.
However, for best access, especially to the heat pump and float,
flip the dishwasher upside-down. The sump (2) is part of the
base and cannot be replaced.
1
2
5
702_58300000130262_ara_en_c
3
4
6
5.1.6
Flipping dishwashers
Follow these instructions to flip dishwashers upside-down or on
their backs for bottom access.
5.1.6.1
To flip dishwasher for bottom access
Tools needed: T20 Torx, # 2 Phillips and flat blade screwdrivers.
1. Remove toe kick – section 5.1.4.1.
2. Disconnect & pull out dishwasher – section 5.1.4.2.
3. Remove all water from dishwasher sump and hoses.
4. Slide dishwasher out completely (below left).
5. Remove both racks (below center).
6. Place a pad or cardboard on the floor and carefully flip the
dishwasher upside-down or on it's back (below right).
1. Water inlet valve
2. Sump
7
3. Drain pump
4. Terminal box
5. Float
6. Heat pump
3
7. Aqua sensor
Page 23 of 50