Bosch Benchmark SHV9PCM3N Руководство по эксплуатации и уходу - Страница 17
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и уходу для Посудомоечная машина Bosch Benchmark SHV9PCM3N. Bosch Benchmark SHV9PCM3N 44 страницы.
Также для Bosch Benchmark SHV9PCM3N: Краткое руководство по эксплуатации и технике безопасности (13 страниц), Руководство по эксплуатации и уходу (44 страниц), Руководство по эксплуатации и уходу (44 страниц)
Печатать страницу
9.4 Switching off the water softening system
If you do not need to use the water softening system, e.g.
you already have a whole house water softening system,
you can turn the system off.
Note
To avoid damage to the appliance, only switch off the
water softening system in the following cases:
¡ The water hardness is max. 26 °E and you are using
combined detergents with salt replacement substances.
According to manufacturers, combined detergents with
salt replacement substances can generally only be used
up to a water hardness of 26 °E without adding special
salt.
¡ The water hardness is 0 - 8 °E. You can omit special
salt.
Press
.
1.
To open the basic settings, press the
2.
seconds.
Press
repeatedly until the display shows H:00.
3.
To store the settings, press the
4.
a The water softening system is switched off and the salt
refill indicator is deactivated.
Rinse aid system
10 Rinse aid system
Rinse aid system
10.1 Rinse aid
For optimum drying results, use rinse aid.
Only use rinse aid intended for household dishwashers.
Adding rinse aid
If the rinse aid refill indicator lights up, fill the dispenser
with rinse aid. Only use rinse aid intended for household
dishwashers.
Press the catch on the lid of the dispenser for rinse aid
1.
and lift
.
button for 3
button for 3 seconds.
2
1
Add rinse aid up to the max mark.
2.
If rinse aid spills out, remove it from the tub.
3.
Spilled rinse aid can cause excessive frothing during
the wash cycle.
Close the lid of the dispenser for rinse aid.
4.
a The lid clicks into position.
10.2 Setting the amount of rinse aid
If there are streaks or water spots on dishware, change
the amount of rinse aid.
Press
.
1.
To open the basic settings, press the
2.
seconds.
Press
repeatedly until the display shows the value set
3.
at the factory r:05.
Press
repeatedly until the right amount of rinse aid
4.
has been set.
– A low setting adds less rinse aid during the wash
cycle and reduces streaking on dishware.
– A higher setting adds more rinse aid during the wash
cycle, reduces water spots and improves the drying
result.
To store the settings, press the
5.
10.3 Switching the rinse aid system off
If you choose not to use rinse aid, you can turn the rinse
aid system off.
Tip: Rinse aid within a combination detergent has limited
effectiveness. You will generally get better results using a
separate rinse aid.
Press
.
1.
To open the basic settings, press the
2.
seconds.
Press
repeatedly until the display shows the value set
3.
at the factory r:05.
Press
repeatedly until the display shows r:00.
4.
To store the settings, press the
5.
a The rinse aid system is switched off and the rinse aid
refill indicator is deactivated.
Rinse aid system en-us
max
button for 3
button for 3 seconds.
button for 3
button for 3 seconds.
17