Bosch DISHWASHER Руководство по эксплуатации - Страница 15

Печатать страницу

Bosch DISHWASHER Руководство по эксплуатации

Additional options

* depending on model

Additional options can be set with the

buttons P.

Express Wash/ Speed Perfect/

E x p r e s s W a s h / S p e e d P e r f e c t ( V a r i o S p e e d )

(VarioSpeed) *

This function can reduce the running time

by approx. 20% to 50% depending on the

selected rinse programme. To obtain

optimum cleaning and drying results at a

reduced running time, water and energy

consumption are increased.

Intensive zone *

Perfect for a mixed load. You can wash

very soiled pots and pans in the lower

basket together with normally soiled

utensils in the upper basket. The spray

pressure in the lower basket is intensified,

the rinsing temperature is increased

slightly.

Hygiene *

H y g i e n e

The temperature is increased during the

cleaning process. This increases the

hygiene status. This additional option is

ideal for cleaning e.g. chopping boards

and baby bottles.

Half load *

H a l f l o a d

If you have only a few items to wash (e.g.

glasses, cups, plates), you can switch to

"half load". This will save water, energy

and time. It is recommended to put a little

less detergent in the detergent dispenser

than for a full load.

Extra drying *

An increased temperature during the final

rinse and an extended drying phase

ensure that even plastic parts dry better.

There is a slight increase in the energy

consumption.

I n t e n s i v e z o n e

E x t r a d r y i n g

Washing the dishes

Programme data

The programme data (consumption

values) can be found in the summary

of instructions. This data refers to normal

conditions and the water hardness set

value 2. Different influencing factors such

as water temperature or mains pressure

may result in deviations.

A qua sensor *

A q u a s e n s o r

* depending on model

The Aqua sensor is an optical measuring

device (light barrier) which measures the

turbidity of the rinsing water.

The Aqua sensor is used according to the

programme. If the Aqua sensor is active,

"clean" rinsing water can be transferred to

the next rinse bath and water consumption

can be reduced by 3–6 litres. If the

turbidity is greater, the water is drained

and is replaced with fresh water. In the

automatic programmes the temperature

and running time can also be adjusted to

the degree of soiling.

Switching on the appliance

– Turn on the tap fully.

– Close the door.

– Switch on ON/OFF switch (.

The Cleaning display )* flashes.

– Rotate programme selector 8

to the required programme.

– Press START button @.

The Cleaning display )* is lit. The

programme starts running.