Bosch DISHWASHER Руководство по эксплуатации - Страница 17

Печатать страницу

Bosch DISHWASHER Руководство по эксплуатации

Switching the dishwasher OFF

Several minutes after the programme has

ended:

Set the main switch

Turn the water tap off.

(Does not apply when Aqua-Stop unit

has been fitted)

Remove dishes, etc. when they have

cooled down.

Interrupting the programme

Set main switch

Indicator lights extinguish. The

programme is retained in the

dishwasher memory.

If the hot water was switched ON or the

appliance has already heated up and

then the appliance door opened, leave

the door ajar for several minutes and

then close.

Otherwise, the appliance door may fly

open due to expansion.

In order to continue with the stored

programme, set the main switch to ON

again.

to OFF.

Programming the timer

You can delay the start of a programme in

increments of one hour for up to 19 hours.

Switch dishwasher ON.

Immediately press the TIMER button

. The numerical display

changes to

Press the TIMER button as many times

as necessary until the numerical display

shows the required delay.

To erase the time delay setting, keep

pressing the TIMER button until

appears in the numerical display.

You can change your programme

selection as often as you like during the

intervening period before the dish-

washer starts up.

Time-remaining indicator

The time-remaining indicator is

self-learning. When the programme

begins, it displays the estimated duration

of that programme. This figure is based

upon the duration of the previous

programme, or if the dishwasher is being

used for the first time, the duration of the

programme used for testing the appliance

in the factory. While the programme is

running, the indicator shows the amount of

time before the programme ends. The time

remaining is also adjusted to account for

the temperature of the water supply and

the number of dishes.