Bosch DISHWASHER Руководство по эксплуатации - Страница 9

Печатать страницу

Bosch DISHWASHER Руководство по эксплуатации

Filling in the salt

Note

If the hardness of your mains

water corresponds to the

device's index value

chapter "Setting up the softening

system"), you do not need to fill

in the salt because the operation

will not use any salt. If the set

values

salt must be added.

During the rinse cycle the salt is being

washed automatically from the salt

compartment into the softening system

where it will dissolve the lime.

The lime-containing solution drains from

the dishwasher. Afterwards the softening

system is ready to be loaded again.

This regeneration cycle will only work if

the salt is dissolved in water.

After switching on the device, lack of salt

is indicated by the display "Refill Salt".

(This display will no longer appear once

you have set the softening system to the

value

Open the screw-type cap of the

compartment

Before operating the device for the first

time you must pour 1 litre of water into

the salt compartment.

(see

are displayed,

Then you must refill salt (not table salt)

using the supplied salt filling aid until the

salt compartment is full (max 1.5 kg).

When you refill the salt, water is being

displaced and drains off. Therefore the

refilling must take place shortly before

switching on the device. (In order to avoid

corrosion). This way the overflowing salt

solution is diluted and flushed immediately.

Then clean the filling area of salt residues

and screw the compartment lid back on

without tilting the lid.

As soon as a sufficiently high salt solution

has formed the display "Refill Salt" will

disappear.

If you do not want to wait until the display

disappears but you want to wash

immediately, confirm the refilling of the salt

using the button M/OK

If you do not want to refill the salt now you

can skip the display "Refill Salt" by

pressing the button M/OK

Do not pour detergent into the

container for special salt. This

would destroy the water

softener.

Depending on the washing frequency and

the hardness setting, the regeneration salt

may not have to be topped up for several

months.