Dragonfly 92-145 Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Проекционный экран Dragonfly 92-145. Dragonfly 92-145 4 страницы. Fixed projection screens

Печатать страницу

Step 4. Attach the Screen Material

A. Wash your hands and clean the work area to avoid staining the screen material.

B. Unpack the screen material and tension rods. Unroll the screen material and lay it flat, with the seam side

up, across the back of the screen frame.

C. Push the shorter tension rods through the edges of the

screen material, making sure not to damage the material.

Do not insert the longer rods yet.

D. Attach snaps 1-4 in order. The rods must be positioned

behind the snaps to provide the correct tension.

E. Insert the longer tension rods.

F. Attach snaps 5-8 in order.

G. Working from the outside towards the center:

Attach the remaining snaps on the short sides,

9 and 10 last.

ii. Attach the remaining snaps on the long sides, 11 and 12

last.

Take your time and avoid breaking lugs. If you can't get the

screen attached with the rod behind all of the snaps, stop

and let the material stretch for a few minutes, then continue.

Let the screen settle after assembly. Small fold lines or

wrinkles from the packaging may exist for a few hours.

Optional for UAW Screens: Anti-Reflection Material

All Ultra Acoustiweave models include a precut sheet of black backing material to reduce reflections from

surfaces behind the screen. The backing is also acoustically transparent, so sound quality is not affected by

it.

To use the backing, either attach it to the rear of the assembled film screen before hanging, or hang it from

the wall behind the screen after fastening the mounting brackets to the wall.

161212-1500

Installation Tips

DF-SL-92-145 Installation Manual

Tension Rod