Electrolux WRT18MP5AWH Руководство по эксплуатации и уходу - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и уходу для Холодильник Electrolux WRT18MP5AWH. Electrolux WRT18MP5AWH 22 страницы. Top mount refrigerator
Печатать страницуTRIM REMOVAL
(FULL-LENGTH TRIM MODELS ONLY)
In some models, the refrigerator door has a full length trim piece which
continues from the bottom of the handle to the bottom of the door.The top
ofthe trim attaches to the handle bracket (Figure 1) or fits around the base
ofthe handle (Figure 2). An adhesive '_rim _ock"ispositionedabout halfway
down.The bottom of the trim is he_din place by either an adhesive trim lock,
or a trim lock with two prongs inserted intoa hole on the face of the door.
TO REMOVE
TRIM:
1,
Remove trim by gently pulling trim lock areas out and away from door.
2.
When trim is free from door, s_ide the trim straight down and away
from base of handle.
TO REMOVE
REFRIGERATOR
HANDLE:
(Handles may be easier to reverse while doors are off.)
Figure 1 Style Handles
1,
Remove two screws attaching handle to top of refrigerafor door,
2,
Remove screw attaching bottom of handle to door.
3.
Remove two hole plugs and hinge pin plug on top of door and install
on opposite side. Use Phillips head screwdriver to remove plastic
screw plug from front of door and install on opposite side
Figure 2 Style Handles
1,
Remove two screws attaching handJe to fop of refrigerator door.
2.
Swing top of handle away from door and slide handle down and off of
dovetail button.
3.
Remove screw and dovetail button and instal_ on other side, moving
hole plugs from corresponding holes to opposite side.
TO ATTACH
REFRIGERATOR
HANDLE:
Figure 1 Style Handles
1,
Secure bottom of handle with screws.
2.
Secure top of handle with screws,
Figure 2 Style Handles
1.
Start with handle offset away from door. Place bottom of handle over
dovetail button, swing handle into an upright posffion and pul_upward,
locking it into place,
2.
Secure top of handle with screws,
TO ATTACH TRIM:
1,
Slide both trim locks out of tdm,
2,
insert new adhesive trim locks contained {n your literature pack,
Figure 1
3.
Install trim to handle by sliding under base of handle. Carefully align
tdm and press down at trim lock locations.
4.
Use rubbing alcohol to remove any adhesive residue from old trim
lock locations,
Figure2