Drainvac COMMERCIAL Series Руководство пользователя - Страница 13
Просмотреть онлайн или скачать pdf Руководство пользователя для Пылесос Drainvac COMMERCIAL Series. Drainvac COMMERCIAL Series 15 страниц.
Также для Drainvac COMMERCIAL Series: Руководство пользователя (15 страниц)
Печатать страницу
ELECTRICAL POWER SUPPLY
GROUNDING INSTRUCTIONS
These units must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric
shock. This appliance is equipped with a cord having an equipment-grounding
conductor and grounding plug. The plug must be inserted into an appropriate
outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
WARNING - Improper connection of the equipment-grounding conductor can result in
a risk of electric shock. Check with a qualified electrician or service person if you are in
doubt as to whether the outlet is properly grounded.
DO NOT MODIFY THE PLUG PROVIDED WITH THE UNITS -
IF IT DOES NOT FIT THE OUTLET, HAVE A PROPER OUTLET INSTALLED
BY A QUALIFIED ELECTRICIAN.
These units are for use on a nominal 120V or a 230V circuit and have a grounding
attachment plug that looks like the one illustrated below. Make sure that the electrical
cord is connected to an outlet having the same configuration as the plug.
NO ADAPTOR SHOULD BE USED WITH THIS APPLIANCE.
Grounded
Grounded pin
*Illustration of a north-americain electrical outlet
24
All manuals and user guides at all-guides.com
Outlet
MAINTENANCE PROCEDURES
Each system requires a minimum maintenance, without any exception.
MOTOR BRUSHES
Beyond the occasional external cleaning, we recommend that you inspect your motor
brushes after 500 hours of use to check how worn they are and have them replaced
if necessary. On average, this inspection should occur once every 3 to 5 years. When
the time comes, contact your retailer or distributor for this maintenance procedure. Take
note that the motor brushes are not included in the warranty.
CARTRIDGE FILTER AND DUST BAG
You must clean the cartridge filter and replace the dust bag periodically. This will
prevent your vacuum from losing any power and will extend its lifespan.
• The dust bag CANNOT be washed or emptied. It must be replaced by a new one. If
you notice a flagrant decline of power, it may be a sign of a full dust bag and must
be changed. DO NOT CHANGE THE DUST BAG WHILE THE UNIT IS RUNNING.
• The cartridge filter can be air cleaned or water cleaned periodically, but must be
replaced every 3 years. If water cleaned, it must be COMPLETLY DRY before
reusing.
Here is how to procede:
1. Release the clamps between the main unit and the tank.
2. Remove the bag and discard it (if you must).
3. Clean or wash the filter and let it dry.
4. Place the filter.
5. Place the new dust bag.
6. Reattach the tank to the main unit.
*IF THE UNIT IS USED EITHER WITHOUT THE FILTER OR THE DUST BAG,
THE WARRANTY WILL BE VOIDED.
25