Drainvac CYCLONIK Series Руководство пользователя - Страница 17

Просмотреть онлайн или скачать pdf Руководство пользователя для Пылесос Drainvac CYCLONIK Series. Drainvac CYCLONIK Series 19 страниц.

TECHNICAL PROBLEMS

THE UNIT WON'T START UP...

SOLUTION :

1) Check if the LED is lit.

2) Check the circuit breaker in your electrical panel.

3) Check the unit's circuit fuse/breaker.

4) Check the 24-volt circuit, as follows :

Establish an electrical contact between the two 24V circuit terminals of the unit with a

metal object such as a screwdriver or a coin.

• If the unit starts up, either the 24V wire is cut or disconnected from one of the

wall inlets, or the hose is defective.

• If the unit does not start up after all theses steps, the printed circuit is defective.

THE UNIT WON'T SHUT DOWN...

SOLUTION :

Check the 24-volt circuit as follows :

Disconnect one of the two wires on the unit's 24-volt circuit.

• If the unit shuts down, the problem could be that two 24-volt wires are touching

themselves somewhere or that the wall inlet is defective.

• If the unit doesn't shut down, the printed circuit is defective.

Unplug the power cord.

SUPPORT

If you wish to speak with a customer service

representative, please contact your supplier/dealer.

To find a retailer near you, please visit our website.