3 | AutoDome 300 Series PTZ Camera System
sent over IP networks and can be viewed with the
Bosch Divar XF Digital Video Recorder, or on a PC
running VIDOS video management software.
Alternatively, a Bosch IP video decoder can be used to
display the video on an analog CVBS or VGA monitor.
For maximum accessibility, the video can be viewed
using a web browser.
Tri-streaming video
Bosch's innovative tri-streaming feature enables
AutoDomes equipped with the optional IP
communications module to generate independent
streams simultaneously. This feature allows you to
stream high-quality images for live viewing while
recording at a reduced frame rate, and at the same
time, stream images to a remote PDA device.
Unsurpassed reliability
All housings feature recessed screws and latches for
increased tamper resistance.
AutoDome pendant housings (indoor and outdoor) are
rated to provide IP 66 protection. In addition, the
pendant housings come equipped with a low-impact,
high-resolution acrylic bubble for enhanced image
clarity
AutoDome in-ceiling housings are rated IK 8
(IEC 62262). These housings feature an impact-
resistant polycarbonate Rugged Bubble to protect your
camera from vandalism. The Rugged Bubble can
withstand impacts equivalent to a 4.5 kg (10 lb)
weight dropped from a height of 3 m (10 ft).
Outdoor EnviroDome housings provide an operating
temperature range down to -40°C (-40°F). The optional
"XT" extreme temperature kit allows an AutoDome to
operate in temperatures down to -60°C (-76°F),
ensuring reliable operation in even the harshest
environments.
The Pressurized Environmental Housing is rated to
provide IP 67 protection for a VG4 Series AutoDome
Modular Camera System from the elements, both
natural and manmade. It is the ideal surveillance
solution for applications that require frequent wash-
down, including traffic, transit, bridges, tunnels and
coastal installations where salt, moisture, dust, insects
and fumes threaten the long-term operation of the
camera.
Ease of installation and servicing
Bosch's innovative software, the Configuration Tool for
Imaging Devices (CTFID), allows operators or
technicians to control the PTZ, change camera
settings, and even update firmware from virtually
anywhere without need for additional wiring. For the
new Ethernet versions, an embedded Web server lets
the installer access all the user settings, make camera
adjustments, and update firmware via a standard Web
browser.
AutoDome's innovative design simplifies installation
and servicing. AutoDome reduces maintenance costs
because you can replace individual modules instead of
entire camera assemblies. Simply pop out the old
module and slide in the new: it's almost as easy as
changing a light bulb. All tethers have been replaced
with hinges, making installation and servicing safer
and easier. You can even access the built-in power
supply without taking down the dome.
The AutoDome 300 Series has advanced built-in
diagnostics to simplify service and minimize
downtime. Using the On Screen Display (OSD), a
technician can quickly and easily check critical
parameters (such as internal temperature and input
voltage level) to verify that the dome is functioning
within acceptable operating limits. If video is not
present, a local inspection of three diagnostic LEDs at
the camera site can identify the presence of video and
control data.
Feature Comparison Matrix
The following table provides an overview of the
AutoDome camera family and its available features:
Standard Features
Interchangeable Modules
High Speed PTZ
Preset Shots
Preset Tour
Guard Tour
Alarm Inputs
High Resolution Camera
Day/Night Operation
IR Sensitive
SensUp Extended Sensitivity
UTP/Coax Transmission
Hybrid Analog/IP Connectivity
Bilinx Remote Configuration*
Cable Compensation
Hot-Swap Camera Modules
Ruggedized, Vandal-Resistant Enclosure
Advanced Features
AutoTrack II Motion Tracking
Video Motion Detection
Image Stabilization
Privacy Masking and Sector Blanking
Advanced Alarm Control
®
*Compatible over Coax and UTP transmission only. Remote configuration over IP via web
interface.
Certifications and approvals
Electromagnetic
Compatibility (EMC)
Product Safety
Region
Europe
AutoDome
AutoDome
AutoDome
AutoDome
100 Series
200 Series
300 Series
500i Series
64
99
99
7/4
7/4
Complies with FCC Part 15, ICES-003, and CE
regulations, including EN50130-4 and
EN50121-4
Complies with CE regulations, UL, CSA, EN,
and IEC Standards
Certification
CE
EMC Directive, Low-Voltage Directive
Печатать страницу