Draper Acumen Recharge E Инструкции Установка и эксплуатация - Страница 5

Просмотреть онлайн или скачать pdf Инструкции Установка и эксплуатация для Проекционный экран Draper Acumen Recharge E. Draper Acumen Recharge E 12 страниц. Battery operated electric projection screen

Печатать страницу
Draper Acumen Recharge E Инструкции Установка и эксплуатация
Acumen
Recharge E & V
™
Section 4.3 - Ceiling Installation:
1. Attach Ceiling Brackets to
Mounting Brackets
2. Secure the Ceiling Brackets to the ceiling using appropriate hardware
CAUTION: Product is very heavy:
Installer must provide adequate attachment hardware and anchors as required.
Installer must also ensure that structure is of adequate strength
3. Ensure that
mounting brackets
4. Slide all
Bracket Locks
to the center of the case.
Mounting Hardware (by others)
NOTE: It is the responsibility of the installer
to select mounting hardware appropriate
for the mounting surface
5. Holding the case by the endcaps, lift it up and over the cleats on the
18"
(457mm)
Max. Distance
Slide to lock case to
6. Once the case is settled on the mounting brackets, slide the
using the provided hardware
are level.
Ceiling Brackets
Secured to Ceiling
Wall Bracket Channels
Bracket
for Case Mounting
Bracket Locks
.
(see figure at right)
.
(by others)
Ceiling
Mounting
Bracket
Figure 7-A
Figure7-B
mounting brackets
. Wall Bracket Mounting Channels are shown in Fig. 8 below.
(see Fig. 7)
One Ceiling Bracket
Centered
Optional
Center Bracket
to the center of each
mounting bracket
page 5 of 12
Ceiling Bracket Assembly
ACUMEN
Ceiling Bracket Assembly
CEILING
ACUMEN
SIDE VIEW
Figure 8
Slide to lock case to
Bracket
and secure set screw on the lock.
(see Fig. 8)
Carriage Bolt
Washer
½" Hex Nut