Draper AKT 315 IX Инструкции по установке и эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Инструкции по установке и эксплуатации для Проекционный экран Draper AKT 315 IX. Draper AKT 315 IX 2 страницы. Electric projection screen
Печатать страницу
Ambassador Screen 220V by Draper
102
mm
Conduit connection
this side
Please Note: Do not wire motors in parallel.
Single Station Control
CE Approved
Junction box at
left end of screen
Internal Screen Wiring
Blue-220v (Common)
Brown-220v (Down)
Black-220v (Up)
Green/Yellow (Motor Ground)
Control
switch
Dashed wiring
by installer
220v,
50 Hz.
Ambassador Screen — Case Dimensions
Motor compartment
Ceiling tile
and grid
(by others)
Viewing
492
surface
mm
Multiple Station Control
Junction box at
left end of screen
Red
Black
Red
Black
Red
Black
220v, 50 Hz.
Low Voltage and Remote Control
White or Blue-Common to screen & 110/220V AC Neutral
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 110/220V AC-Hot
Black-to 110/220V AC-Hot
Green/Yellow (Ground)
Dashed wiring by electrician
Low voltage wiring by others
Eye Port for IR Eye, RF Receiver or LED
Wall Switch. For more than one of
these, a splitter is required.
3 Button Wall Switch
DOWN - Black
COM - White
UP - Red
Aux Port for connecting additional LVC-III
modules (up to six total can be linked-
connect from Aux to Eye).
www.draperinc.com
Fabric width + 61 cm
Mounting brackets
Wiring Diagrams
Not CE Approved
Internal Screen Wiring
Blue-220v (Common)
Brown-220v (Down)
Black-220v (Up)
Green/Yellow (Motor Ground)
Cap off with wire
nut & tape
Blue
Blue
Blue
Dashed wiring
by installer
Internal Screen Wiring
White/Blue (Common)
Red 110/Black 220 (Up)
Black 110/Brown 220 (Down)
Green/Yellow
(Motor Ground)
STOP
Location of key
operated on-off
switch if furnished
STOP
Control
Switches
24v DC
(765) 987-7999
251
mm
127
mm
118
mm
See separate Serial Communication-
RS232 Instruction sheet for enabling
RS232 with the MC1.
To
110/220V
Line
Page 2 of 2
MC1