Bosch Series 4 Руководство по эксплуатации - Страница 16

Печатать страницу

Bosch Series 4 Руководство по эксплуатации

If the oven is to switch on and off

automatically

Please remember that easily spoiled foods must not be allowed

to remain in the cooking compartment for too long.

Example in the picture: Setting for

190 °C. It is 10:45 . The meal takes 45 minutes to cook and

should be ready at 12:45 .

The function selector is used to set the type of heating.

The temperature selector is used to set the temperature or

grill setting.

Press the

Clock button.

Use the

button to set the cooking time.

Press the

Clock button repeatedly until the

flashes.

You can see in the display when the meal will be ready.

Use the

button to set a later end time.

The setting is adopted after a few seconds.

The end time is shown in the display until the oven starts.

Setting the clock

When the appliance is connected for the first time or after a

power cut, the

symbol and three zeros flash in the display.

Set the clock. The function selector must be switched off.

Setting procedure

Setting the timer

You can use the timer as a kitchen timer. It runs independently

of the oven. The timer has a special signal. This means that you

can tell whether the timer duration or the cooking time has

elapsed. You can also set the timer if the childproof lock is

active.

Setting procedure

Press the

Timer button.

The

symbol flashes.

Use the - or + button to change the timer duration.

Default value for + button = 10 minutes

Default value for - button = 5 minutes

The timer starts after a few seconds. The

the display. You will see the time counting down.

Top/bottom heating at

End symbol

symbol lights up in

The cooking time has elapsed

A signal sounds. The oven switches off. Press the

twice and switch off the function selector.

Note: You can make changes as long as the symbol is

flashing. When the symbol lights up, the setting has been

adopted.

Rapid heating

With rapid heating, your oven reaches the temperature selected

particularly quickly.

Use rapid heating when temperatures above 100 °C are

selected.

To ensure an even cooking result, do not place your dish in the

cooking compartment until rapid heating is complete.

Set the function selector to

Turn the temperature selector to set the desired temperature.

The

symbol lights up in the display. The oven begins to heat

up.

The rapid heating process is complete.

The

symbol goes out in the display. Place your dish in the

oven and select the desired type of heating.

Press the

Clock button.

12.00 appears in the display and the

Use the + or - button to change the clock.

After a few seconds, the time is saved. The

out.

Changing from summer to winter time, for example

Press the

Clock button twice and change the time using the

+ or - button.

When the time has elapsed

A signal sounds. Press the

Changing the timer duration

Press the

Timer button. Use the + or - button to change the

time.

Cancelling the setting

Press the

Timer button. Press the - button until zero is shown

on the display.

symbol flashes.

symbol goes

Timer button. The timer goes out.

button