Draper 07849 Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Электроинструмент Draper 07849. Draper 07849 20 страниц. 10.8v rotary multi-tool kit

HEALTH AND SAFETY INFORMATION

5.5

CONNECTION TO THE POWER SUPPLY (CHARGER)

Caution: Risk of electric shock. Do not open.

This appliance is supplied with a moulded 3 pin mains plug for your safety. The value of the fuse

fitted is marked on the pin face of the plug.

Should the fuse need replacing, ensure the substitute is of the correct rating, approved to BS1362

and ASTA or BSI Kite marked.

ASTA

BSI

The fuse cover is removable with a small plain slot screwdriver. Ensure the fuse cover is replaced

before attempting to connect the plug to an electrical outlet. If the cover is missing, a replacement

must be obtained or the plug replaced with a suitable type.

If a replacement plug is to be fitted this must be carried out by a qualified electrician.

The damaged or incomplete plug, when cut from the cable should be disabled to prevent

connection to a live electrical outlet.

This appliance is Class II

and is designed for connection to a power supply matching that detailed

†

on the rating label and compatible with the plug fitted.

If an extension lead is required, use an approved and compatible lead rated for this appliance.

Follow all the instructions supplied with the extension lead.

Double insulated

: This product requires no earth connection as supplementary insulation is

†

applied to the basic insulation to protect against electric shock in the event of failure of the basic

insulation.

Important

If using an extension lead, follow the instructions that came with your lead regarding

maximum load while cable is wound. If in doubt, ensure that the entire cable is unwound.

Using a coiled extension lead will generate heat which could melt the lead and cause a fire.

– 10 –