Draper 58329 Руководство пользователя - Страница 11

Просмотреть онлайн или скачать pdf Руководство пользователя для Электроинструмент Draper 58329. Draper 58329 16 страниц.

BASIC HEAT GUN OPERATIONS

Note: Isolate the power source by either removing

the power supply plug from the socket, or battery

from the tool, before carrying out adjustment,

servicing or maintenance.

IMPORTANT: Ensure that the machine is switched

OFF before connecting to the power supply.

8.1 ON/OFF SWITCH – FIG.1

The ON/OFF switch has three positions/settings:

– Position O is off.

– Position 1 ( I ) is a 400°C heat (approx.)

– Position 2 ( II ) is high heat approximately 600°C.

– FIG.2

This heat gun can be positioned free-standing. This

allows the user to have both hands free which is

essential for certain applications, e.g. pipe bending,

plastic welding, etc. Position the heat gun on it's

end, only on a level suitable surface.

Note: Never leave the heat gun unattended or

switched on.

8.3 THERMAL OVERLOAD

PROTECTION

Please note this machine is fitted with a safety

thermal overload protection. If the product, is

continuously used too close to the workpiece resulting in over heating and the machine potentially

catching fire, the thermal overload protection will be activated and heat production will stop.

Note: The fan and motor will continue to run, drawing in cool air past the thermal overload

protection device. After a short time (10 seconds) the hot air gun will automatically start producing

heat again.

Warning! Remember the nozzle will remain hot for sometime – a safe storage location should be

used.

Continued thermal overload protection activation may cause permanent damage. If the heat gun

becomes too hot as in misuse situations then a permanent fail safe will operate and the heat gun

will become inoperable.

FIG.1

FIG.2

- 11 -