Draper 70276 Оригинальное руководство по эксплуатации - Страница 13

Просмотреть онлайн или скачать pdf Оригинальное руководство по эксплуатации для Электроинструмент Draper 70276. Draper 70276 20 страниц.

Печатать страницу

Draper 70276 Оригинальное руководство по эксплуатации

BASIC IMPACT WRENCH OPERATIONS

8.1 INSTALLING AND REMOVING

SOCKETS

This wrench is supplied with a 3/8" Square Drive.

Note: This product is equipped with an electric

brake. Never use any sockets or accessories that

are not hardened for impact use.

Never use standard chrome vanadium steel

sockets which can shatter and can cause

personal injury.

To fit a socket:

–

Push fit the socket over the anvil. The friction

based ring holds the socket securely in place.

To remove a socket:

–

Pull the socket away from the anvil to remove.

Note: Extra effort may be required when fitting and

removing brand new sockets on their initial usage.

8.2 ROTATIONAL DRIVE SELECTION –

FIGS. 1 – 2

The forward/reverse drive selector switch (6)

determines the direction of rotation of the drive,

i.e. clockwise or anticlockwise.

To alter the direction of rotation:

–

Stop the machine and push switch to the left

or right.

–

When the direction switch is pushed to the left,

the drive will rotate clockwise.

–

When the switch is pushed to the right, the

drive will rotate anticlockwise.

–

Before operation, check that the switch is set

in the required position. Do not change the

direction of rotation until the wrench comes to

a complete stop.

–

When the wrench is not in use move the

direction switch to the neutral position

(the middle setting) to lock the trigger out.

Note: Failure to use the neutral position

may activate the trigger inadvertently.

This inadvertent operation may cause the

wrench to become damaged.

(6)

FIG. 1

FIG. 2

– 13 –