Draper 83611 Руководство - Страница 8

Просмотреть онлайн или скачать pdf Руководство для Электроинструмент Draper 83611. Draper 83611 20 страниц. Biscuit jointer
Также для Draper 83611: Руководство по эксплуатации (20 страниц)

Печатать страницу

HEALTH AND SAFETY INFORMATION

5.2 ADDITIONAL SAFETY INSTRUCTIONS FOR BISCUIT JOINTERS

Safe Working Practice

Blades must be rated for at least the speed marked on the tool. Blades running over rated

speed can come apart and cause injury.

Always use the guard. The guard is there to protect the operator from broken blade fragments

and unintentional contact with the blade.

Hold power tool by insulated gripping surfaces, because the blade could contact its own

cord. Cutting a "live" wire may make exposed metal parts of the power tool "live" and could give

the operator an electric shock.

Use only the blades specified for this tool.

Never operate the tool with the blade locked in exposed position or without the blade cover

properly in place.

Make sure that the blade and guard slide smoothly before operation.

Check the blades carefully for cracks or damage before operation. Damaged or blunt blades

must be replaced immediately.

Inspect for and remove all nails or foreign matter from the workpieces before operation.

Always place the workpieces on a stable workbench.

Secure the workpieces firmly with clamp or vice.

Hold the tool firmly with both hands.

Keep your hands and body away from the grooving area.

Run the tool for a while without the blade pointing toward anybody. Watch for vibration or

wobbling that could indicate poor installation or a poorly balanced blade.

Do not leave the tool running unattended.

Always be sure that the tool is switched off and unplugged before making any adjustments

or replacing the blade.

If you wear gloves, use tight fitting gloves. Loose fitting gloves can get caught in rotating parts

of machinery and cause severe injury.

Do not use the tool with damaged guards.

- 8 -