Draper 83689 Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Draper 83689. Draper 83689 20 страниц. 18v cordless impact wrench
Печатать страницу
5.
HEALTH & SAFETY INFORMATION
Wait for the machine to stop. Unless the machine is fitted with a safety brake; some parts may
continue to move due to momentum. Wait for all parts to stop; then unplug it from the power
supply before making any adjustments, carrying out maintenance operations or just finishing
using the tool.
Remove and check setting tools. Some machinery requires the use of additional tools or keys to
set, load or adjust the power tool. Before starting the power tool always check to make certain
they have been removed and are safely away from the machine.
Prevent unintentional starting. Before plugging any machine in to the power supply, make sure
the switch is in the OFF position. If the machine is portable; do not hold the machine near the
switch and take care when putting the machine down; that nothing can operate the switch.
Carefully select an extension lead. Some machines are not suitable for use with extension leads. If
the tool is designed for use outdoors; use an extension lead also suitable for that environment.
When using an extended lead, select one capable of handling the current (amps) drawn by the
machine in use. Fully extend the lead regardless of the distance between the power supply and the
tool. Excess current (amps) and a coiled extension lead will both cause the cable to heat up and
can result in fire.
Concentrate and stay alert. Distractions are likely to cause an accident. Never operate a power tool
if you are under the influence of drugs (prescription or otherwise), including alcohol or if you are
feeling tired. Being disorientated will result in an accident.
Have this tool repaired by a qualified person. This tool is designed to confirm to the relevant
international and local standards and as such should be maintained and repaired by someone
qualified; using only original parts supplied by the manufacturer: This will ensure the tool remains
safe to use.
5.2 SPECIFIC SAFETY INSTRUCTIONS FOR IMPACT WRENCH USE
Good Working Practices/Safety
The following suggestions will enable you to observe good working practices, keep yourself
and fellow workers safe and maintain your tools and equipment in good working order.
WARNING!! LEAKING BATTERY PACKS
The electrolyte in the battery packs is corrosive, if a battery pack is damaged and
leaking, avoid contact with the skin; if contact is made, flush the area with running
water, pat dry and seek medical attention and advice at the earliest opportunity,
inform the medical service that the contaminant was a "high alkaline, corrosive liquid". If
the electrolyte comes into contact with the eyes, flush with copious amounts of water only,
seek medical attention immediately, relaying the information above.
WARNING!! KEEP TOOLS AND EQUIPMENT OUT OF THE REACH OF YOUNG CHILDREN
Battery Powered Tools
Workplace/Environment
Under no circumstances should CHILDREN be allowed in work areas.
It is good practice to leave the tool and the battery pack separated until work is about to
commence; if this is not practical do not carry tools around with fingers near the trigger
switch, and engage the stop-lock of the tool if one is available. It is preferable to move small
tools e.g. drills and jigsaws to the work area in their carrying/storage cases; if this is not
possible it is advisable that you do not mount the blades or drill bits into the tool until you
reach the work area (they make effective stabbing tools if you trip or stumble).
If you are working from ladders or towers, ensure they are securely fixed/braced, and always
maintain a balanced, comfortable working posture; do not over-reach, or perform simian
agility exercises to get the work done, the extra time required to move the ladder or tower is
a good trade off against injuries sustained from a fall. Similarly non-slip footwear and
non-slip surfaces are a good investment.
7