Draper Storm Force 83648 Руководство по эксплуатации - Страница 12
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Draper Storm Force 83648. Draper Storm Force 83648 20 страниц. 400w 230v oscillating multi-tool kit
Печатать страницу
8.
BASIC MULTI-TOOL OPERATIONS
8.4 USING THE VARIABLE SPEED CONTROL -
FIG. 5
Select oscillation frequency (speed) while the motor is
running. The variable speed control
set the optimum oscillating frequency according to the
accessories used and the respective application.
HIGH OSCILLATION FREQUENCY:
Sanding, sawing, rasping and polishing stone and metal.
LOW OSCILLATION FREQUENCY:
Polishing varnishes.
8.5 SECURING THE WORKPIECE
CAUTION: Before working with your tool make sure
that no power cords will be damaged.
8.6 SANDING
Typical application: wood, metal; small areas, especially
corners, edges and places difficult to access. Select high
oscillation frequency.
Sand with a constant movement and light pressure.
Heavy pressure does not increase the removal - the
sanding sheet merely wears faster.
8.7 SAWING WITH THE SEGMENT SAW
BLADE
Typical application: wood, plastics, sheet metal. Select
high oscillation frequency.
The saw blade lasts longer if the wear is distributed
evenly. To ensure an even distribution, loosen the saw
blade, rotate it and retighten firmly.
8.8 SCRAPING
Typical application: Scraping off old varnish or
adhesives, removing glued carpeting, e.g. on stairs or
other small to medium-sized surfaces.
Select medium/high oscillation frequency.
12
can be used to
FIG.5