Draper 20849 Руководство по эксплуатации - Страница 12
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сверло Draper 20849. Draper 20849 20 страниц. Twin pack 10.8v li-ion cordless rotary drill & impact driver
Печатать страницу
8.
BASIC CORDLESS ROTARY DRILL OPERATIONS
8.2 DUST AND SWARF
A correctly fitted dust mask, suitable for the activity and in accordance to the relevant
standard must be worn.
Swarf produced by metal drilling is extremely sharp. Take precautions when clearing swarf.
The burr left on the hole is also sharp and should be removed with a suitable tool.
Always wear safety goggles.
WARNING: Drill bit will be hot after use.
8.3 INSTALLING AND REMOVING BITS - FIG. 3
The drill is fitted with a keyless chuck, this means that a
chuck key is not required to secure the drill or
screwdriver bit.
i. Place the drill bit shoulder into the chuck as far as it
will go.
ii. Tighten the chuck firmly.
Note: Short screwdriver bits need only be inserted to the
depth of the hexagon shank before tightening chuck by
hand.
8.4 LED WORK LIGHT - FIG. 4
To aid drilling and screwdriving in confined,
inadequately lit spaces, the LED work light
automatically illuminates when the trigger is activated.
8.5 FORWARD/REVERSE SELECTOR - FIG. 5
The switch determines the direction of rotation of the
collet, i.e. clockwise or anticlockwise.
i.
Stop the drill and push switch
right.
NOTE: When the direction switch is pushed to the left,
the collet will rotate clockwise.
Before operation, check that the switch is set in the
required position. Do not change the direction of
rotation until the collet comes to a complete stop.
ii.
When the drill is not in use move the direction
switch to the neutral position (the middle setting)
to lock the trigger out.
8.6 TRIGGER
When the trigger is depressed, the chuck will rotate
(provided the direction switch is set in the forward or
reverse position). This trigger switch is electronic which
enables the user to vary the speed continuously. The
speed varies according to how far the trigger switch is
depressed. The further it is depressed, the faster the
chuck will rotate. The lighter it is depressed, the slower
it will rotate.
12
to the left or
FIG.3
FIG.4
FIG.5