Draper CD182V2B Руководство по эксплуатации - Страница 12
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сверло Draper CD182V2B. Draper CD182V2B 20 страниц. 18v cordless rotary drill
Печатать страницу
8.
BASIC CORDLESS ROTARY DRILL OPERATIONS
8.4 LED WORKLIGHT - FIG. 4
To aid drilling a screwdriving in confined, inadequately
lit spaces, the LED worklight
illuminates when the trigger is activated.
8.5 FORWARD/REVERSE SELECTOR - FIG. 5
The switch determines the direction of rotation of the
chuck, i.e. clockwise or anticlockwise.
i.
Stop the drill and push switch
right.
NOTE: When the direction switch is pushed to the
left, the chuck will rotate clockwise.
When the switch is pushed to the right, the chuck
will rotate anticlockwise. Before operation, check
that the switch is set in the required position. Do
not change the direction of rotation until the chuck
comes to a complete stop.
ii.
When the drill is not in use move the direction
switch to the neutral position (the middle setting)
to lock the trigger out.
8.6 TRIGGER
When the trigger is depressed, the chuck will rotate
(provided the direction switch is set in the forward or
reverse position). This trigger switch is electronic which
enables the user to vary the speed continuously. The
speed varies according to how far the trigger switch is
depressed. The further it is depressed, the faster the
chuck will rotate. The lighter it is depressed, the slower
it will rotate.
8.7 TORQUE SELECTION CONTROL - FIG. 6
By turning the collar
amount of torque.
i. In the "twist drill" setting
drill/screwdriver has full torque.
ii. Settings 1-16 provide a facility for setting the
torque to the required level. For example, this
means that repetitive driving of screws of the same
size will be driven into the material to the same
torque, thus giving the same fixing strength, or in
the case of countersunk screws, these will all be
driven to the same depth in the material.
The torque control prevents the heads of small
diameter screws being twisted off when correctly
set.
12
automatically
to the left or
it is possible to adjust the
, the
FIG.4
FIG.5
FIG.6