Draper STORMFORCE CHD108SF Руководство по эксплуатации - Страница 12

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сверло Draper STORMFORCE CHD108SF. Draper STORMFORCE CHD108SF 20 страниц. 10.8v li-ion cordless hammer drill

Печатать страницу

BASIC CORDLESS HAMMER DRILL OPERATIONS

8.2 DUST AND SWARF

A correctly fitted dust mask, suitable for the activity and in accordance to the relevant

standard must be worn.

Swarf produced by metal drilling is extremely sharp. Take precautions when clearing swarf.

The burr left on the hole is also sharp and should be removed with a suitable tool.

Always wear safety goggles.

WARNING: Drill bit will be hot after use.

8.3 INSTALLING AND REMOVING BITS - FIG. 3

The drill is fitted with a keyless chuck, this means that a

chuck key is not required to secure the drill or

screwdriver bit.

i. Place the drill bit shoulder into the chuck as far as it

will go.

ii. Tighten the chuck firmly.

Note: Short screwdriver bits need only be inserted to the

depth of the hexagon shank before tightening chuck by

hand.

8.4 LED WORK LIGHT - FIG. 4

To aid drilling a screwdriving in confined, inadequately

lit spaces, the LED work light

illuminates when the trigger is activated.

8.5 FORWARD/REVERSE SELECTOR - FIG. 5

The forward/reverse selector switch determines the

direction of rotation of the chuck, i.e. clockwise or

anticlockwise.

Stop the drill and push switch

right.

NOTE: When the direction switch is pushed to the left,

the chuck will rotate clockwise.

Before operation, check that the switch is set in the

required position. Do not change the direction of

rotation until the chuck comes to a complete stop.

ii.

When the drill is not in use move the

forward/reverse selector switch to the neutral

position (the middle setting) to lock the trigger

out.

8.6 TRIGGER - FIG.5

When the trigger

(provided the forward/reverse selector switch is set in

the forward or reverse position). This trigger switch is

electronic which enables the user to vary the speed

continuously. The speed varies according to how far the

trigger is depressed. The further it is depressed, the

faster the chuck will rotate. The lighter it is depressed,

the slower it will rotate.

automatically

to the left or

is depressed, the chuck will rotate

FIG.3

FIG.4

FIG.5