Draper TP108VLI Руководство по эксплуатации - Страница 14
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сверло Draper TP108VLI. Draper TP108VLI 20 страниц. Twin pack 10.8v li-ion cordless rotary drill & impact driver
Печатать страницу
9.
BASIC CORDLESS IMPACT DRIVER OPERATIONS
9.1 INSTALLING AND REMOVING BITS - FIG. 10
This driver is supplied with a ¼" Female Hex.
Pull and hold the quick release collet
insert and to release the bit.
NOTE: This product is equipped with an electric brake.
Never use any bits or accessories that are not hardened
for impact use.
Never use steel sockets which can shatter and can cause
personal injury.
9.2 LED WORK LIGHT - FIG. 11
To aid working in confined, inadequately lit spaces, the
LED work light
trigger is activated.
9.3 FORWARD/REVERSE SELECTOR - FIG. 12
The switch determines the direction of rotation of the
collet, i.e. clockwise or anticlockwise.
i.
Stop the drill and push switch
right.
NOTE: When the direction switch is pushed to the left,
the collet will rotate clockwise.
Before operation, check that the switch is set in the
required position. Do not change the direction of
rotation until the collet comes to a complete stop.
ii.
When the drill is not in use move the direction
switch to the neutral position (the middle setting)
to lock the trigger out.
9.4 TRIGGER
When the trigger is depressed, the chuck will rotate
(provided the direction switch is set in the forward or
reverse position). This trigger switch is electronic which
enables the user to vary the speed continuously. The
speed varies according to how far the trigger switch is
depressed. The further it is depressed, the faster the
chuck will rotate. The lighter it is depressed, the slower
it will rotate.
14
automatically illuminates when the
outwards to
to the left or
FIG.10
FIG.11
FIG.12