Draper CSM185C Руководство по эксплуатации - Страница 11

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Пила Draper CSM185C. Draper CSM185C 12 страниц. Metal cutting saw 185 mm

MAINTENANCE AND PARTS

REPLACEMENT

Regular inspection and cleaning reduces the necessity for maintenance operations and

will keep your tool in good working condition. The tool bearings and gears are life-long

lubricated, however it is advised to check the condition of the grease in the head every

100 hours, if necessary replace the grease. The motor must be correctly ventilated

during tool operation. For this reason avoid blocking the air inlets with hands. After use

disconnect the tool from the power supply and clean carefully, use compressed air

through ventilation slots.

DISPOSAL:

At the end of the machine's working life, or when it can no longer be repaired, ensure

that it is disposed of according to the standard regulations of the country in which it is

being used, and that the disposal operation is carried out by specialized personnel

following authorized guidelines.

In all circumstances:

- Do not abandon in the environment;

- Do not dispose of together with solid urban waste products;

- Contact the special recycling centres.

WARNING:

Disconnect the plug from the power supply socket before replacing any parts.

BRUSHES:

The brushes must be replaced after approx. 150-200 working hours, or if they are less

than 5-6mm in length.

WARNING:

For correct tool operation always change the brushes in pairs, not separately. The use of

original Draper spare parts is recommended. After having fitted new brushes allow the

motor to run without load for at least five minutes for the brushes to bed.

IMPORTANT:

This operation should only be performed by an authorized person.

REPLACING THE POWER SUPPLY CABLE:

Check that the power supply cable is in good condition, if not have it replaced by an

authorized person.

OPTIONAL ACCESSORIES

185mm 36T Metal Saw Blade

Stock No.73519

Part No.CSB185M

180mm 40T Stainless Steel Saw Blade

Stock No.73520

Part No.CSB180SS

185mm 60T Aluminium Saw Blade

Stock No.73521

Part No.CSB185A

- 10 -