Draper MS560/3 Инструкции - Страница 4

Просмотреть онлайн или скачать pdf Инструкции для Пила Draper MS560/3. Draper MS560/3 4 страницы.

To get the best from your saw, you must make sure it is correctly set, ensuring the

following points are correct:

(a) The saw blade is tensioned sufficiently to avoid 'whip' which will cause the blade to

deviate from a true cut.

(b) The blade is 'in line' and central to the frame.

(d) The workpiece is square and true to the base casting.

(e) The correct type of blade is used.

SAFETY FIRST TO AVOID INJURY: Do not remove the blade guard whilst fitting the bow

saw blade to the frame. Refit the blade guard when work is complete and when

removing the blade from the frame.

After assembly has been carefully carried out, always test your mitre saw and the

angles with some scrap timber, to ensure the machine is assembled correctly and

cutting true.

DRAPER TOOLS LIMITED,

Hursley Road, Chandler's Ford,

Eastleigh, Hants. SO53 1YF. England.

any form or by any means, electronic, mechanical

photocopying, recording or otherwise without prior

SAW SETTING

IMPORTANT WARNING

Tel: (01703) 266355.

Fax: (01703) 260784.

No part of this publication may be reproduced,

stored in a retrieval system or transmitted in

permission in writing from Draper Tools Ltd.