Draper 99074 Руководство - Страница 11
Просмотреть онлайн или скачать pdf Руководство для Воздушный компрессор Draper 99074. Draper 99074 16 страниц. Dc air compressor
Печатать страницу
8.2 OPERATING INSTRUCTIONS –
FIG. 2
Attach 1/4" quick connect stud of the extension coil
hose to the coupler on your compressor and the
other end to the stud on the tyre gun. The tyre gun
can be used for both inflation and deflation. Please
familiarise yourself with the following functions of
this versatile air tool.
8.3 TYRE INFLATION – FIGS. 3 – 5
– Attach one end of the extension coil hose to the
compressor and the other end to the tyre gun.
– Attach the tyre gun chuck to the tyre valve stem
by pressing the lever on the side of the tyre gun
chuck.
– Turn compressor switch on and hold down the
trigger on the tyre gun to begin inflation.
– Inflate the tyre whilst monitoring the pressure on
the gauge. Inflate just past the desired pressure
and release the trigger.
– Use the push button bleed valve to release the
air to the desired pressure.
– Once finished turn power switch on compressor
to the off position.
Note: To release excess pressure from the system,
turn off compressor and disconnect hose from
compressor.
With the tyre inflation gun still connected to the
other end of the coil hose, push the bleed valve
button on the tyre inflation gun to release excess
pressure.
– Caution!
● Avoid over inflation, never exceed
recommended pressure on articles to be inflated.
Bursting can cause serious injury.
Note: Your air compressor is equipped with a
pressure switch (cut on at 130 PSI [8.96 Bar].,
cut off at 155 PSI [10.34 Bar]). This feature is
designed to protect the air compressor from
over-pressure causing permanent damage to your
air compressor. The pressure switch automatically
turns off the motor when the internal pressure of
the air compressor reaches the factory set "cut-off"
pressure of 155 PSI [10.34 Bar] and restarts
when the internal pressure drops below 130 PSI
[8.96 Bar].
FIG.2
FIG.3
FIG.4
FIG.5
- 11 -