Draper 20922 Руководство по эксплуатации - Страница 14

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Шлифовальный станок Draper 20922. Draper 20922 20 страниц. 820w 230v 115mm angle grinder

Печатать страницу

PREPARING THE GRINDER

8.3 FITTING/REPLACING ACCESSORIES (NOT SUPPLIED) - FIG. 3

NOTE: Remove the plug from the socket before

carrying out adjustment, servicing or

maintenance.

WARNING: Prior to mounting an abrasive

wheel ensure the expiry date has not exceeded

rendering it potentially hazardous.

WARNING: Selection of the correct accessory,

suitable for the intended application is vital.

Seek guidance if uncertain of selection.

WARNING: The rated (no load) revolutions per

minute of the tool must not exceed the speed

capacity of the accessory. Please refer to the

accessory manufacturers instructions for

information.

VISUAL INSPECTION:

Prior to fitting, abrasive/superabrasive wheels

shall be subject to a visual inspection.

INSPECTION:

Each time after mounting, the

abrasive/superabrasive wheel shall be test run

for a reasonable time.

The specified maximum operating speed of the

wheel shall not be exceeded.

Damage abrasives shall be destroyed.

Always wear approved safety goggles.

IMPORTANT

LEGAL

NOTICE

B, C, D (FIG.3):

For cutting applications, and to comply to

current legislation, it is necessary to replace the

"grinding" guard supplied with this machine

with a "cutting" guard (Draper Stock

No.41430) and must be fitted for your safety.

FIG.3

GRINDER SPINDLE

A. Type 27: Depressed Centre Grinding Wheel

B. Type 41: Flat Cutting-off Wheel

C. Type 42: Depressed Centre Cutting-off Wheel

D. Superabrasive Wheel (Diamond/CBN Abrasive)

E. Wire Cup Brush

(M14)