Draper Stormforce 65130 Руководство - Страница 6
Просмотреть онлайн или скачать pdf Руководство для Шлифовальный станок Draper Stormforce 65130. Draper Stormforce 65130 20 страниц. Air die grinder
Печатать страницу
5.
HEALTH AND SAFETY INFORMATION
5.1
GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE
When using any type of power tool there are steps that should be taken to make sure that you, as
the user, remain safe.
Common sense and a respect for the tool will help reduce the risk of injury.
Read the instruction manual fully. Do not attempt any operation until you have read and
understood this manual.
Most importantly, you must know how to safely start and stop this machine, especially in an
emergency.
Keep the work area tidy and clean. Attempting to clear clutter from around the machine during
use will reduce your concentration. Mess on the floor creates a trip hazard. Any liquid spilt on the
floor could result in you slipping.
Find a suitable location. If the machine is bench mounted, the location should provide good
natural light or artificial lighting as a replacement. Avoid damp and dusty locations as they will have
a negative effect on the machine's performance. Do not expose the tool to rain or water. In all
cases, do not operate power tools near any flammable materials.
Keep bystanders away. Children, onlookers and passers-by must be restricted from entering the
work area for their own protection. The barrier must extend a suitable distance from the tool user.
Unplug and house all power tools that are not in use. A power tool should never be left unattended
while connected to the power supply. They must be housed in a suitable location, locked up and
away from children. This includes battery chargers.
Do not overload or misuse the tool. All tools are designed for a purpose and are limited to what
they are capable of doing. Do not attempt to use a power tool (or adapt it in any way) for an
application it is not designed for. Select a tool appropriate for the size of the job. Overloading a tool
will result in tool failure and user injury. This also applies to the use of accessories.
Dress properly. Loose clothing, long hair and jewellery are all dangerous because they can
become entangled in moving machinery. This can also result in parts of the body being pulled into
the machine. Clothing should be close-fitting, with any long hair tied back and jewellery and ties
removed. Footwear must be fully enclosed and have a non-slip sole.
Wear personal protective equipment (PPE). Dust, noise, vibration and swarf can all be
dangerous if not suitably protected against. If the work involving the power tool creates dust or
fumes, wear a dust mask. Vibration to the hand, caused by operating some tools for longer
periods, must be protected against. Wear vibration-reducing gloves and allow long breaks
between uses. Protect against dust and swarf by wearing approved safety goggles or a face
shield. These are some of the more common hazards and preventions. However, always find out
what hazards are associated with the machine/work process and wear the most suitable protective
equipment available.
Do not breathe contaminated air. If the work creates dust or fumes, connect the machine
(if possible) to an extraction system either locally or remotely. Working outdoors can also help,
if possible.
Move the machine as instructed. If the machine is hand-held, do not carry it by the power supply
cable. If the product is heavy, employ a second or third person to help move it safely or use a
mechanical device. Always refer to the instructions for the correct method.
Do not overreach. Extending your body too far can result in a loss of balance and you falling.
This could be from a height or onto a machine and will result in injury.
Maintain your tools correctly. A well-maintained tool will do the job safely. Replace any damaged
or missing parts immediately with original parts from the manufacturer. As applicable: keep blades
sharp, moving parts clean, oiled or greased, handles clean, and emergency devices working.
– 6 –