Draper Motorized FlexShade Инструкции по установке и эксплуатации
Просмотреть онлайн или скачать pdf Инструкции по установке и эксплуатации для Внутренняя отделка Draper Motorized FlexShade. Draper Motorized FlexShade 8 страниц. Motor operated window shades with several control options
Также для Draper Motorized FlexShade: Руководство по эксплуатации (12 страниц)
Печатать страницуMotorized FlexShade
Motor Operated Window Shades with Several Control Options
Overview - Motorized FlexShade Components
FlexShade Motor
120V Standard AC Motor
120V RTS AC Motor
120V RS485 Intelligent AC Motor
Brackets
Only (L)
Endcap (L)
for Fascia
Endcap
Cover (L)
Section 1 - Motor Types, Names
and Voltage
These instructions apply to all Draper medium duty
motorized window shades using the following motors:
MOTOR NAME
MOTOR VOLTAGE
Sonesse 50
120VAC
Sonesse Ultra 50
120VAC
Sonesse RTS
120VAC
Sonesse RTS Ultra
120VAC
Sonesse RS485
120VAC
Sonesse RS485 Ultra
120VAC
Contents
Motorized FlexShade Components ................................................1
Warnings and Safety Information ...................................................2
Field Adjustments, Cleaning and Maintenance .............................2
Section 1
Motor Types, Names and Voltage...................................................1
Section 2
Mounting Brackets
Section 3
Endcaps with Fascia ........................................................................3
Section 4
(3 options)
M12
Cable
Retainer Clip
Section 2 - Optional Hardware
Optional light gap reduction hardware
may be included with the Motorized FlexShade
Light gap reduction hardware is provided in
stock lengths unless otherwise specified. It is
the installers responsibility to measure, cut and
properly install this hardware in a manner that does
not interfere with shade operation.
'L' Angle
'U' Channel
'H' Channel
.........................3
®
Brackets
Only (R)
Accessories for
Light Gap Reduction
(listed below)
Read and understand all warnings
(Page 2 of this document)
Section 5
Section 6
Electrical Connections ....................................................................4
Section 7
Limit Switch Adjustments ..............................................................5
120V Components, Motors and Controls .......................................6
Section 7
RTS Components, Motors and Controls ........................................7
Section 8
RS485 Components, Motors and Controls ....................................8
Section 9
INSTRUCTIONS
INSTALLATION & OPERATION
Endcap
Cover
(R)
Endcap (R)
for Fascia
Motor Mounting Plate
TOOLS REQUIRED
POWER DRILL
PENCIL
TAPE MEASURE
LEVEL
®.
HARDWARE
(by others)
CAUTION
beginning installation.
If you have any difficulties installing or servicing your
Motorized FlexShade, call your dealer or Draper, Inc.
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
|
FORM: FSMO_Inst18
© 2018 All Rights Reserved
before