BCP SKY4630 Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Музыкальный инструмент BCP SKY4630. BCP SKY4630 8 страниц. 30-inch classical acoustic guitar starter kit
Печатать страницу
DIAGRAM
2
3
1
1. Tuning Pegs
2. Tuning Machine
3. Headstock/Head
4. Neck
5. String
TUNING STRINGS
1.
Install a 3V CR2032 battery in the part F tuner. Attach the tuner to the headstock of the guitar.
2.
Turn tuner on and tune the guitar strings accordingly.
- Standard tuning is as follows (low to high): E, A, D, G, B, E
GUITAR STRING MAINTENANCE
If strings are di
cult to play or do not play correctly:
Replacing guitar strings can remedy many problems involving poor sound. All strings can be changed at
once or strings can be changed individually. To change a guitar string, the old string should be
completely removed before attaching the new string. After the new string is attached, the guitar will need
to be re-tuned.
CHANGING STRINGS
Removing Old Strings:
1.
To remove a guitar string, find the tuning peg and tuning machine that the string is attached to. Loosen
the string by winding the tuning peg until the string has no tension.
2.
Continue to wind the string loose until the string can be pulled loose from the top. The strings can be
pulled out via the bridge at the bottom of the guitar.
3.
If you do not wish to use the old string again, you can cut the string near the middle of the strings via
wire cutters. If you choose to do this, be careful and hold the string securely next to the cut; otherwise,
the string will pop up and can potentially harm you.
4
|
Please retain these instructions for future reference.
4
5
6
7
6. Fret
7. Bridge
8. Saddle
9. Bridge Pins
8
9