BCS BCS-580CA Руководство пользователя - Страница 8
Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности BCS BCS-580CA. BCS BCS-580CA 10 страниц. Super high resolution colour camera
Печатать страницуNight to Day: switch to Night mode while gain lower than
the set value(night to day value can be set from 155-to 185
based on requirements).170 by default.
Auto Mode: auto day/night switch IR Cut filter. Color at
day and change to B/W.
Day mode: turn off day/night switch ,won't removing IR Cut filter.
Day/Night mode: removing IR Cut filter in night switch to night mode,
high quality B/W picture.
External trigger: removing Day/Night IR Cut filter according to external
trigger signal.
Note: only Day/Night Mode camera will be induct IR, and improve
the night effect by removing IR Cut filter. Do not too close to object
in case of infrared light. Or it may cause to removing IR Cut filter
over and over again. Therefore choose the suitable infrared light
and adjust suitable angle according to environment in using.
I
SET..
MASK
Enter the menu
through the left or right key to set the mask
PRIVACY
mode.
MASK
MASK NUMBER<1-8>
MASK SET
H.START POSITION
H.END POSITION
V.START POSITION
V.END POSITION
MASK COLOR
EXIT:PRESS MENU KEY
SET
001
OFF
HOLD
-11-
8 mask areas can be set at most, step (if want to set the first mask
area):set the MASK NUMBER 001; set the MASK SET ON; recover
the masked area completely by changing the four frames; select the
shown colorforthe masked area, Lock, Grey, White, Black, Red,
Orange, Yellow. Green. Blue, Purple etc optional.
Same setting the next areas.
Enter the WBC MODE menu by left or right key to set the white
balance.
WBC MODE SET
ANTI-COLOR ROLLING
AUTO TRACE WB
PUSH
INDOOR
FLUORESCENT LIGHT
OUTDOOR
MANUAL WB
EXIT:PRESS MENU KEY
OFF
OFF
ON
OFF
OFF
OFF
ADJ
-12-