Drawmer DS501 Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Оборудование для звукозаписи Drawmer DS501. Drawmer DS501 15 страниц. Dual channel noise gate
Печатать страницуDS501 OPERATORS' MANUAL
SAFETY CONSIDERATIONS
TO REDUCE THE RISK OF FIRE REPLACE THE MAINS FUSE ONLY WITH THE SAME
TYPE, WHICH MUST BE A CLASS 3, 230 VOLT, TIME DELAY TYPE, RATED AT 80mA
WHERE THE MAINS INPUT VOLTAGE SWITCH IS SET TO 230 VOLTS AC. AND
160mA WHERE THE MAINS INPUT VOLTAGE IS 115 VOLTS AC. ALL FUSES MUST
COMPLY WITH IEC 60127-2. THE FUSE BODY SIZE IS 20mm x 5mm.
DO NOT
ATTEMPT TO CHANGE OR TAMPER WITH THE SUPPLIED MAINS CABLE.
DO NOT
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS
This product is designed for standard 19" rack mounting and occupies 1U of rack
space. Use four M6 pan head screws to secure the unit into the rack. Fibre or plastic
washers may be used to prevent the front panel becoming marked by the mounting
bolts.
Care should be taken in the choice of positioning. The unit should not be
!
mounted where other equipment obstructs the normal air flow.
Avoid mounting the unit directly above power amplifiers or power supplies
that radiate significant amounts of heat.
The DS501 should not be operated near any water or in a location where
!
moisture might be present.
CAUTION - MAINS FUSE
CAUTION - MAINS CABLE
CAUTION - SERVICING
PERFORM ANY SERVICING. REFER ALL SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING
EQUIPMENT TO RAIN OR MOISTURE.
INSTALLATION
1