Drawmer S3 Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Оборудование для звукозаписи Drawmer S3. Drawmer S3 11 страниц. Three-band stereo vacuum tube compressor

Печатать страницу

INSTALLATION

The S3 is designed for standard 19" rack mounting and

occupies 3U of rack space. Fibre or plastic washers may

be used to prevent the front panel becoming marked by

the mounting bolts. Always connect the mains earth to

the unit.

Because the S3 contains ten valves it will generate more

heat than a simple solid state unit. Avoid mounting the

unit directly above power amplifiers or power supplies that

radiate significant amounts of heat. In addition it is advised

that you leave at least 1U of space above to allow heat to

dissipate. Alternatively, a fan should be fitted somewhere

near to the rear of the unit to circulate cooler air and help

expel any excess heat. (see fig. 1).

It is also recommended to the S3 is mounted horizontally

to allow heat to escape vertically through the vents on the

lid. To mount at an angle may cause the S3 to overheat

which will damage internal components (see fig. 2).

fig.1 RACK MOUNT POSITIONING

fig.2 MOUNT HORIZONTALLY

fig.2 TYPICAL S3 SETUP

DRAWMER S3 O

PERATOR'S

ANUAL