Bosch 2 Руководство пользователя и инструкция по установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство пользователя и инструкция по установке для Печь Bosch 2. Bosch 2 16 страниц. Mini blender
Также для Bosch 2: Руководство по быстрой установке (16 страниц), Руководство по установке и использованию (18 страниц), Оригинальное руководство по эксплуатации (13 страниц), Оригинальное руководство по эксплуатации (22 страниц), Руководство по эксплуатации (32 страниц), Руководство пользователя (28 страниц), Руководство по эксплуатации (42 страниц), Руководство по эксплуатации (8 страниц), Руководство по эксплуатации (8 страниц), Руководство по эксплуатации (12 страниц), Краткое руководство по эксплуатации (2 страниц), Краткое руководство по эксплуатации (9 страниц), Руководство по эксплуатации и инструкции по установке (36 страниц), Руководство пользователя и инструкция по установке (48 страниц), Руководство по эксплуатации (26 страниц), Краткое справочное руководство (2 страниц), Руководство пользователя и инструкция по установке (24 страниц), Руководство по эксплуатации (42 страниц), Информация для использования (28 страниц), Руководство пользователя (40 страниц), Руководство пользователя и инструкция по установке (35 страниц), Руководство пользователя (24 страниц)

Печатать страницу
Bosch 2 Руководство пользователя и инструкция по установке
en Preventing material damage
▶ Take hold of the filter cover after opening
until it no longer swings out.
▶ Close the filter cover slowly.
Risk of injury when opening and closing the
hinges.
▶ Keep your hands away from the hinges.
The light emitted by LED lights is very
dazzling, and can damage the eyes (risk
group 1).
▶ Do not look directly into the switched-on
LED lights for longer than 100 seconds.
WARNING ‒ Risk of electric shock!
If the appliance or the power cord is dam-
aged, this is dangerous.
▶ Never operate a damaged appliance.
▶ Never pull on the power cord to unplug the
appliance. Always unplug the appliance at
the mains.
▶ If the appliance or the power cord is dam-
aged, immediately unplug the power cord
or switch off the fuse in the fuse box.
▶ Call Customer Service. → Page 8
▶ Repairs to the appliance should only be
carried out by trained specialist staff.
2  Preventing material damage
2.1 General
Follow these instructions when using the appliance.
ATTENTION!
Condensate may cause corrosion damage.
▶
To prevent condensation from building up, switch on
the appliance during cooking.
If moisture gets into the controls, this may result in
damage.
▶
Never clean controls with a wet cloth.
Incorrect cleaning damages the surfaces.
▶
Follow the cleaning instructions.
3  Environmental protection and saving energy
Help protect the environment by using your appliance
in a way that conserves resources and by disposing of
reusable materials properly.
3.1 Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
▶
Sort the individual components by type and dispose
of them separately.
4
Improper repairs are dangerous.
▶ Repairs to the appliance should only be
carried out by trained specialist staff.
▶ Only use genuine spare parts when repair-
ing the appliance.
▶ If the power cord of this appliance is dam-
aged, it must be replaced by trained spe-
cialist staff.
An ingress of moisture can cause an electric
shock.
▶ Before cleaning, pull out the mains plug or
switch off the fuse in the fuse box.
▶ Do not use steam- or high-pressure clean-
ers to clean the appliance.
WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic clean-
ing agents in conjunction with aluminium parts
in the interior of the appliance may cause ex-
plosions.
▶ Never use highly caustic alkaline or highly
acidic cleaning agents. In particular, do not
use commercial or industrial cleaning
agents in conjunction with aluminium parts,
e.g. grease filter on extractor hoods.
▶
Do not use harsh or abrasive detergents.
▶
Clean stainless steel surfaces in the direction of the
finish only.
▶
Never clean controls with stainless steel cleaners.
Condensation that flows back in may damage the ap-
pliance.
▶
The air extraction duct must be installed with a
gradient of at least 1° from the appliance.
If you put incorrect stress on the design elements, they
may break off.
▶
Do not pull design elements.
▶
Do not place objects on the design elements or
hang objects from them.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.