Bosch CDG634A 0 Series Руководство по эксплуатации - Страница 25

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Печь Bosch CDG634A 0 Series. Bosch CDG634A 0 Series 36 страниц.
Также для Bosch CDG634A 0 Series: Руководство пользователя и инструкция по установке (40 страниц)

Replacing the cooking compartment bulb

Heat-resistant 230 V/25 W halogen bulbs with seals are

available from the after-sales service. Please specify the

E number and FD number of your appliance.

Warning – Risk of electric shock!

When replacing the cooking compartment bulb, the

bulb socket contacts are live. Before replacing the bulb,

unplug the appliance from the mains or switch off the

circuit breaker in the fuse box.

Warning – Risk of burns!

The appliance becomes very hot. Never touch the

interior surfaces of the cooking compartment or the

heating elements. Always allow the appliance to cool

down. Keep children at a safe distance.

Unplug the appliance from the mains or switch off

the circuit breaker in the fuse box.

Turn the cover anti-clockwise to remove it.

Remove the bulb.

Insert the new bulb, making sure that the pins are in

the correct position.Push the bulb in firmly.

Caution!

Only operate the appliance with the glass cover and

seals.

Slide the new seals and the clamping ring onto the

glass cover in the right order.

Screw the glass cover with the seals back on again.

Connect the appliance to the power supply and

carry out commissioning again.

If the glass cover for the halogen bulb or the seals are

damaged, they must be replaced. A new glass cover

can be obtained from the after-sales service. Please

specify the E number and FD number of your appliance.

If the seal around the outside of the cooking

compartment is faulty, it must be replaced.

Replacement seals for your appliance can be obtained

from the after-sales service. Please specify the E

number and FD number of your appliance.

Open the appliance door.

Pull off the old seal.

Push in the new door seal at one point and pull it in

all the way round. The joint must be at the side.

Check again that the seal is correctly fitted in the

corners.

Trouble shooting