Bosch CMG7241 2 Series Руководство пользователя и инструкция по установке - Страница 14

Просмотреть онлайн или скачать pdf Руководство пользователя и инструкция по установке для Печь Bosch CMG7241 2 Series. Bosch CMG7241 2 Series 48 страниц.

Печатать страницу
en Basic operation
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
▶
Do not use the appliance if there is water on the
cooking compartment floor.
▶
Wipe away any water on the cooking compartment
floor before operation.
▶
Press
to start the operation.
a The settings appear on the display.
8.4 Interrupting the operation
You can interrupt the operation and then continue
again.
1.
To interrupt the operation, press
2.
Press
again to resume the operation.
8.5 Setting the operating mode
After you have switched on the appliance, the menu
appears on the display.
1.
To scroll through the various selection options,
swipe to the left or right on the display.
Swipe right or left to scroll through the menu and
‒
other setting options.
Swipe down or up to scroll through selection
‒
lists.
2.
To select a function, press the function on the dis-
play.
a Depending on the function, possible setting values
or other tiles are available for selection.
3.
To go back to a setting if necessary, press
4.
To change the setting values, use the digital setting
ring:
Swipe over the setting ring clockwise or anti-
‒
clockwise, as required.
Or press a specific position on the setting ring.
‒
5.
Use
to confirm the setting.
6.
Press
to start the operation.
7.
If the operation is ended:
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Note: You can save your settings as "Favourites"
and use these again.
→ "Favourites", Page 20
8.6 Setting the type of heating and the
temperature
1.
Press "Types of heating" in the menu.
2.
Press the type of heating that you want to use.
3.
Press the temperature in °C or, depending on the
type of heating, the setting.
14
⁠ .
⁠ .
to switch the ap-
4.
Use the setting ring to set the temperature.
5.
Press
on the display to confirm the set temperat-
ure.
If required, you can implement additional settings:
– → "Time-setting options", Page 15
– → "Microwave", Page 16
6.
Press
to start the operation.
a The appliance starts heating.
a The setting values and how long the appliance has
already been in operation are shown on the display.
7.
If the operation is ended:
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Note: The most suitable type of heating for your food
can be found in the description of the type of heating.
→ "Types of heating", Page 10
Changing the type of heating
When you change the type of heating, the other set-
tings are also reset.
1.
Press
⁠ .
2.
Press
⁠ .
3.
Press the type of heating that you want to use.
4.
Reset the operation and use
Changing the temperature
Once the operation has started, you can change the
temperature at any time.
1.
Press
on the display.
2.
Press the temperature.
3.
Change the temperature with the setting ring.
4.
To confirm the change, press
a The change is applied.
8.7 Displaying information
In most cases, you can call up information about the
function that you have just started. The appliance auto-
matically displays certain information, e.g. to ask you to
do/confirm something or to issue a warning.
1.
Press
⁠   "Info".
a Information is displayed for a few seconds.
2.
To scroll through lots of content in the message,
swipe over the display.
3.
If necessary, use
8.8 Sabbath-compliant use
If you want to operate your appliance so that it is Sab-
bath-compliant, use the time-setting options and
change the basic setting for the lighting.
to switch the ap-
to start.
on the display.
to exit the message.