AirStage UTB- UB Руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Пульт дистанционного управления AirStage UTB- UB. AirStage UTB- UB 9 страниц. Wired type for air conditioner

PREPARATORY OPERATION

To set the current day and time
1
CLOCK ADJUST
Press the TIMER MODE button for 2
seconds or more. The time display on
the remote controller will flash.
3
Press the SET TIME buttons to set the current time.
Press repeatedly to adjust the current time in 1-minute increments. Press and
hold to adjust the current time in 10-minute increments.

OPERATION

Instructions related to heating are applicable to "HEAT PUMP MODELS" and "HEAT RECOVERY MODELS" only.
To start/stop operation
To set the operation mode
G Operation mode setting
G Room temperature setting
Lower
Raise
G Fan speed setting
G Energy save setting
ENERGY
SAVE
2
DAY
DAY OFF
SU
MO
SU MO TU WE TH FR SA
ex. Monday 10:00
Press the START/STOP button.
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
Press the MASTER CONTROL button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
AUTO
COOL
* AUTO and FAN cannot be selected for "HEAT PUMP MODELS."
Press the SET TEMPERATURE buttons to set the room temperature.
Temperature setting range
AUTO ............................................................ 18 to 30 °C
COOL/DRY .................................................... 18 to 30 °C
HEAT ............................................................. 10, 12, 14, or 16 to 30 °C*
* Room temperatures as low as 10, 12, and 14 °C cannot be set depending on the
model.
Press the FAN CONTROL button to set the fan speed.
AUTO
HIGH
Press the ENERGY SAVE button to start or stop the energy-
saving air conditioner operation.
* The energy save air conditioner operation is not available
Press the DAY button and select the current day.
A
appears around the selected day.
TU
WE
TH
4
DRY
FAN
MED
depending on the model.
FR
SA
CLOCK ADJUST
Press again to end.
HEAT
LOW
En-2