Bosch HBA13B2 3B Series Руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Печь Bosch HBA13B2 3B Series. Bosch HBA13B2 3B Series 24 страницы. Built-in oven

Bosch HBA13B2 3B Series Руководство по эксплуатации
Cancelling the timer duration
Use the
button to reset the timer duration to 00:00. The
A
change will be adopted after a few seconds. The timer is
switched off.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the
timer,
U
r
clock, press the
button repeatedly until the brackets are
0
around the relevant symbol. The display shows the value for a
few seconds.

Cooking time

The cooking time for your dish can be set on the oven. When
the cooking time has elapsed, the oven switches itself off
automatically. This means that you do not have to interrupt
other work to switch off the oven. The cooking time cannot be
accidentally exceeded.
Example in the picture: cooking time 45 minutes.
Use the function selector to set the type of heating.
1.
Set the temperature or grill setting using the temperature
2.
selector.
Press the
0
button twice.
3.
00:00 is shown in the display. The time symbols light up and
the brackets are around
Use the
@
or
A
button to set the cooking time.
4.
Default value for
button = 30 minutes
@
Default value for
button = 10 minutes
A
The oven will start up after a few seconds. The cooking time
counts down in the display and the [
other time symbols go out.
The cooking time has elapsed
A signal sounds. The oven stops heating. 00:00 is shown in the
display. Press the
button. You can set a new cooking time
0
using the
or
button. Or press the
@
A
the function selector to the off position. The oven switches off.
Changing the cooking time
Use the
or
button to change the cooking time. After a few
@
A
seconds, the change is adopted. If the timer has been set,
press the
button beforehand.
0
10
cooking time,
end time or
p
.
r
] symbol lights up. The
r
button twice and turn
0
Cancelling the cooking time
Use the
button to reset the cooking time to 00:00. After a few
A
seconds, the change is adopted. The cooking time is
cancelled. If the timer has been set, press the
beforehand.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
0
To call up the
clock, press the
around the relevant symbol. The display shows the value for a
few seconds.

End time

You can change the time at which you wish your dish to be
ready. The oven starts automatically and finishes at the desired
time. You can, for example, put your dish in the cooking
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example in the picture: it is 10:30 am, the cooking time is
45 minutes and the oven is required to finish cooking at
12:30 pm.
Adjust the function selector.
1.
Set the temperature selector.
2.
Press the
0
3.
Use the
or
@
4.
Press the
0
5.
The brackets are around
ready is displayed.
Use the
or
@
6.
After a few seconds, the oven adopts the settings and switches
to standby position. The time at which the dish will be ready is
shown in the display and the
and
0
symbols go out. When the oven starts, you can see the
cooking time counting down in the display and the
in brackets. The
The cooking time has elapsed
A signal sounds. The oven stops heating. 00:00 is shown in the
display. Press the
using the
@
or
the function selector to the off position. The oven switches off.
timer,
cooking time,
U
r
button repeatedly until the brackets are
0
button twice.
button to set the cooking time.
A
button.
. The time when the dish will be
p
button to set a later end time.
A
p
symbol is in brackets. The
symbol goes out.
p
0
button. You can set a new cooking time
A
button. Or press the
0
button
0
end time or
p
0
U
r
symbol is
button twice and turn