Electrolux AWT 8120 W Руководство пользователя - Страница 18
Просмотреть онлайн или скачать pdf Руководство пользователя для Стиральная машина Electrolux AWT 8120 W. Electrolux AWT 8120 W 21 страница.
Печатать страницу
18 electrolux
Untying
5
1
3
4
To install your washing machine at the same level
as surrounding furniture, proceed as shown on
picture 5.
Water supply
Install the supplied water inlet hose at the rear of
your washing machine by proceeding as follows
(Do not reuse an old hose):
1
2
Open the water inlet tap. Check there are no leaks.
The water inlet hose can not be extended. If it is
too short, please contact the after-sales service.
Drainage
The connector at the end of the flexible hose can
be attached to all common types of standpipe. At-
Environment
Disposing of the appliance
All materials carrying the
cyclable. Dispose of them at a waste collec-
tion site (enquire at your local council) for collection
and recycling. When disposing of your appliance,
remove all parts which could be dangerous to oth-
ers: cut off the power supply cable at the base of
the appliance.
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring
4) depending on the model
1
4
3
2
2
5
3
4
symbol are re-
tach the connector to the standpipe with the hose
clamp supplied with the appliance
Fit the U-piece on the drainage hose. Place every-
thing in a drainage point (or in a sink) at a height of
between 70 and 100 cm. Ensure it is positioned
securely. Air must be able to enter the end of the
hose, to avoid any risk of siphoning.
Warning!
The drain hose must never be stretched. If it is too
short, contact an engineer.
Electrical connection
This washing machine must only be connected in
single-phased 230 V. Check the fuse size: 13 A for
230 V. The appliance must not be connected with
an extension lead or multi-plug adaptor. Ensure
that the plug is earthed and that it is in accordance
with current regulations.
Positioning
Position the appliance
on a flat and hard sur-
face in a ventilated lo-
cation. Ensure the ap-
pliance does not come
into contact with the
wall or other furniture.
Accurate levelling avoids vibrations, noise and pre-
vents the appliance from moving when running.
this product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could oth-
erwise be caused by inappropriate waste handling
of this product. For more detailed information
about recycling of this product, please contact
your local council, your household waste disposal
service or the shop where you purchased the
product.
4)