Bosch HBA58B9 0B Series Руководство по эксплуатации - Страница 11
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Печь Bosch HBA58B9 0B Series. Bosch HBA58B9 0B Series 40 страниц.
Печатать страницу
Setting rapid heating
Rapid heating is not suitable for all types of heating.
Suitable types of heating
3D hot air
■
Top/bottom heating
■
HydroBaking
■
Pizza setting
■
Intensive heat
■
Suitable temperatures
Rapid heating will not work if the temperature is set to less than
100 °C. If the temperature in the cooking compartment is only
slightly less than the temperature you have set, rapid heating is
not necessary. It will not switch on.
Time-setting options
You can call up the time-setting options menu by pressing
the
button. The following functions are available:
0
If the oven is switched off:
Setting the timer
■
Setting the clock
■
If the oven is switched on:
Setting the timer
■
Setting the cooking time
■
Setting a later end time
■
Setting the time-setting options in brief
Press the
0
button to open the menu.
1.
Set the desired function by turning the rotary selector.
2.
Press the
button to change line and turn the rotary
X
3.
selector to set the time or cooking time.
Press the
button to close the menu.
0
4.
A detailed description of how to adjust each individual function
is provided below.
Setting the timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
Press the
0
button.
1.
The time-setting options menu appears.
Press the
X
button and set the timer run time using the
2.
rotary selector.
Press the
button to close the time-setting options menu.
0
3.
The display returns to its previous state. The
timer appears, and the time can be seen counting down.
When the time has elapsed
A signal sounds. The time has elapsed. The display shows
00:00. You can cancel the signal earlier by pressing the
U
button.
Cancelling the timer time
Press the
button to open the time-setting options menu.
0
Press the
button and use the rotary selector to turn the time
X
back to 00:00. Press the
0
symbol for the
U
button to close the menu.
Setting rapid heating
Press the
c
button to activate rapid heating. The
appears next to the temperature you have set. The temperature
indicator bars start filling in.
Once all the bars are filled, rapid heating is complete. You will
hear a short signal. The
in the cooking compartment.
Notes
Rapid heating is cancelled if you change the type of heating.
■
If a cooking time has been set, this runs independently of
■
rapid heating and counts down immediately when operation
is started.
You can use the
■
compartment temperature during rapid heating.
To ensure an even cooking result, do not place your dish in
■
the cooking compartment until rapid heating is complete.
Cancelling rapid heating
Press the
button. The symbol goes out.
c
Changing the timer time
Press the
0
button to open the time-setting options menu.
Press the
X
button and in the next few seconds change the
timer time by turning the rotary selector. Press the
close the menu.
Setting the cooking time
If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in the picture: Top/bottom heating, 180 °C, cooking
time of 45 minutes.
Press the
0
button.
1.
The time-setting options menu appears.
7LPHVHWWLQJ RSWLRQV
7LPHU
PLQVHF
([LW ZLWK
Switch to the cooking time by turning the rotary selector.
2.
7LPHVHWWLQJ RSWLRQV
&RRNLQJ WLPH
PLQVHF
([LW ZLWK
Press the
X
button to change line.
3.
0
symbol goes out. Place your dish
c
button to check the current cooking
°
c
symbol
0
button to
11