Electrolux EFLW317TIW Руководство по эксплуатации и уходу - Страница 27
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и уходу для Стиральная машина Electrolux EFLW317TIW. Electrolux EFLW317TIW 32 страницы.
Также для Electrolux EFLW317TIW: Руководство по установке (44 страниц)
Печатать страницу
Water Inlet Hose Inspection
Periodically inspect all water inlet hoses for
water leaks, wear, cuts, corrosion and bulges.
Replace all hoses, if any sign of the above is
visible. All hoses should be replaced every
5 years to reduce the risk of hose failures.
When replacing hoses, refer to the Installation
Instructions for proper installation. Do not
overtighten or cross thread the fittings. Do not
allow the hose to rub against sharp objects.
Always ensure the hose fitting rubber gasket is
installed and free from water leaks when water
pressure is applied.
Instructions for Limited Use, Vacation, and Away from Home
IMPORTANT
Your washer should be operated ONLY when
you are home. If you are away from home or
not using your washer for extended periods of
time, follow these steps:
1. Turn off the water supply to washer to avoid
water leaks due to water pressure surges and
unforeseen occurrences in the water supply.
2. Disconnect or unplug the electrical power to
the washer.
3. Remove excess water from the dispenser,
interior door and tub and perform the Care
and Cleaning steps.
Reconnecting Water Supply and Electrical
IMPORTANT
When reinstalling the washer after
disconnecting the water supply lines and
electrical power, please follow the steps
below:
1. Review the Installation Instructions provided
with the washer to ensure the appliance is
level and the water and electrical power sup-
ply is properly connected.
2. Ensure the water lines are flushed of debris,
prior to connecting the water lines to the
washer inlet.
3. Check for water leaks and replace supply
hoses if needed.
Care & Cleaning
RUBBER WASHERS
MUST BE PRESENT
REPLACE HOSES EVERY 5 YEARS
Grounding type
wall receptacle
Do not, under
any circumstances,
cut, remove,
or bypass the
grounding prong.
Power cord with
3-prong grounded plug
27