Bdcom S2008 Руководство по установке оборудования - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке оборудования для Сетевой маршрутизатор Bdcom S2008. Bdcom S2008 16 страниц.

Chapter 2 Preparing for installation

The following diccusses the considering cases of switch istallation,includes two sections:

Please continre to read "switch Installation" after reading this section.

2.1.1

1. Keep the chassis ares clear and dust-free during and after installation；

2. Put the cover in a safe place;

3. Put the tools away from walk areas where you and others could fall over

4. Do not wear loose clothing that could get caught in the chassis. Fasten your

5. If the working environment could cause damage to your eyes, wear

6. Do not do anything that causes damage to human or device.

2.1.2

Please follow the instructions below. Any mal-operation could cause damage to human;

1. Read the installing instruction carefully before operating the system;

2. Only qualified mechanics are allowed to install or replace the switch;

3. Before working on a chassis or working near power supplies,unplug the

4. Unplug AC plug and disconnect DC connection before working on the case

5. Ultimate configuration of this product must follow all applicable national

2.1.3

Follow these guidelines when working oon equipment powered by electricity.

6. Before working on equipment that is connecting to power lines , remove

7. Before working on a chassis or working near power suppliees,unplug the

8. Do not touch the power supply when the power cord is connected .

them；

tie or scarf and roll up your sleeves.

protection glasses;

power cord om AC units;disconnect the power at the circiut breaker on DC

units.

or near the power supply.

laws and regulations.

jewelry (including rings, necklaces, and watches).Metal objects will heat up

when connect to the power and ground and can cause serious burns or can

weld the metal objects to the terminals.

power cord on AC units,disconnect the power at the circiut breaker on DC

units.

BDCOM S2008 Switch Hardware Installation Guide

- 4 -