Electrolux EW 1005 F Буклет с инструкциями - Страница 11

Просмотреть онлайн или скачать pdf Буклет с инструкциями для Стиральная машина Electrolux EW 1005 F. Electrolux EW 1005 F 27 страниц. Washing machine
Также для Electrolux EW 1005 F: Руководство по установке и эксплуатации (24 страниц)

Electrolux EW 1005 F Буклет с инструкциями
5.
START / PAUSE button
After selecting the required programme, by the
programme selector (see section 8), press this
button to start the machine; the corresponding light
stops flashing and will keep lighting until the
programme finishes.
To interrupt the running programme, depress
START / PAUSE button: the corresponding
light starts to flash.
To restart the programme from the point at which it
was interrupted, press
again.
6.

SPIN REDUCTION Button

This option allows the reduction of the final and the
intermediate spin speed or to select the
HOLD option.
Press this button so many times as it was necesary
until the relevant light turns on corresponding to the
whished option.
The speeds on the lights refer to cotton programmes
in both models (EWF805 and EWF1005)
• For the model EWF1005:
- The light 1000r.p.m. corresponds to 900 r.p.m.
in synthetics and wool programmes and in the
delicates programmes corresponding to 700
r.p.m.
- The lights for 700 r.p.m. and 500r.p.m. are
common for all programmes making reference to
the same speed.
• For the model EWF805:
- The light 800r.p.m. corresponds to 700 r.p.m. in
the delicates programmes.
- The lights for 700 r.p.m. and 500r.p.m. are
common for all programmes making reference to
the same speed.
NOTE: In both models, by default, the light of spin
speed will turns on according to the selected
programme
RINSE HOLD: by selecting this option, the
water of the last rinse is not drained, in order to
prevent the fabrics from wrinkling. When the
programme hasfinished,
START / PAUSE button
RINSE
END light will iluminate.
7. Programme progress display
During programme cycle the light
CYCLE EXECUTION will remain lit.
The light
END will illuminate to indicate that the
selected programme has finished.
The light
END flashes in the event of operating
problems:
• 4 flashes: door open.
• 2 flashes: problem with water draining.
• 1 flash: problem with water supply.
For more information see paragraph "Something not
working?" at the end of this booklet.
11