1PBROADBAND technicolor DGA4231 Руководство по быстрой настройке - Страница 7
Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Сетевой маршрутизатор 1PBROADBAND technicolor DGA4231. 1PBROADBAND technicolor DGA4231 8 страниц.
Печатать страницу
7. Configure your DGA4231 to your needs (optional)
The DGA4231 web interface allows you to configure your DGA4231
using your web browser. To access the DGA4231 web user interface:
1 Browse to
connected to your DGA4231 (either wired or over Wi‑Fi).
2 The DGA4231 user interface appears. By default, you are logged in as
guest. This means that some items are hidden. To view all items, click
Sign In and enter admin as user name and the ACCESS KEY printed on
the bottom of your DGA4231 as password.
8. Troubleshooting
8.1. Turning off the Wi‑Fi
When you press and hold the Wi‑Fi (
the Wi‑Fi will be turned off or on depending on its current state.
How can I tell whether the Wi‑Fi is on?
If the Wi‑Fi (
If the Wi‑Fi (
Wi‑Fi is on:
• Browse to the DGA4231 web interface and check the colors of the bullet in
the Wireless card. If the bullets are green, then the Wi‑Fi is on.
• On a Wi‑Fi device that is within range of the DGA4231, check whether the
DGA4231 appears in the list of available networks.
8.2. WPS troubleshooting
WPS does not start
Make sure that the Wi‑Fi is on. For more information, see
on
page 6.
The WPS LED is blinking red
This indicates that your DGA4231 could not connect to your Wi‑Fi device.
Do the following:
1 Wait two minutes and then start WPS again.
2 Turn your DGA4231 slightly and then try again.
3 Obstructions may deteriorate the signal strength. Try to minimize the number of
walls between the two devices and then try again.
4 Move the devices closer to each other and then try again.
http://192.168.1.1
) LED is solid or blinking green, the Wi‑Fi is on.
) LED is off, then use one of the following methods to check if the
on a computer or device that is currently
) button between three and eight seconds,
6
"8.1. Turning off the Wi‑Fi"