Carl Wittkopp HotelStar 7214 Инструкции по установке

Просмотреть онлайн или скачать pdf Инструкции по установке для Замки Carl Wittkopp HotelStar 7214. Carl Wittkopp HotelStar 7214 2 страницы. Electronic lock

Печатать страницу

HotelStar 7214

1 Mounting of electronic lock 7214

For safety reasons it is not allowed to install the electronic lock in the

area of aperature.

• 4 M6 screws are used to mount the electronic lock. To do so, pass the screws

through the mounting holes provided for this purpose, inserting from the bottom

side of the electronic lock case. To prevent autonomous screw loosing, it is advisable

to use lock washers. The screws should be tightened by a torque of max 10 Nm to

avoid malfunctions.

• After installation the bolt of the electronic lock must not be subjected to tention or

pressure. Max. force applied to the lock bolt 10 N.

• The connection points for the input unit and the battery case will be found on the

in-

spection sticker on the electronic lock.

• The electronic lock is maintenance-free when used in normal residential and office

enviroments. After 10.000 locking cycles it is advisable to have a security and function

check of the electronic lock carried out by a trained service technician.

• Failure to observe these installation instructions or opening the lock casing by

personal untrained will void the manufacture´s warranty.

Abb. 1: Lock mounting dimensions

HotelStar 7214

24.03.2011

Installation Instructions

Installation Instructions No. 9999-097-0