AirStage UTY-DTGY Руководство по установке - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке для Сенсорная панель AirStage UTY-DTGY. AirStage UTY-DTGY 8 страниц. Touch panel controller
Печатать страницуcover. (Fig. 3)
Remove the screw at 2 places of the wiring
hole and remove the wiring hole cover. (Fig. 2)
Fig1
3
Rear cover outline
95 (3-3/4)
72 (2-27/32) 72 (2-27/32)
46 (1-13/16) 46 (1-13/16)
211 (8-5/16)
Installation plate
Fig1
4
9(11/32)
*
Refer to the dimensional drawing and verify the consistency of
the hole positions of the installation screws of the switch box to
be installed in advance. (Fig. 4)
51 21
Terminal names
▪
Terminal names: Names of connection terminals inside
the rear cover
Power supply cable
through hole
Power supply
cable connection
terminal
En-4
Unit: mm (in.)
123 (4-27/32)
95 (3-3/4)
9(11/32)
Anchorposition
Transmission cable
connection terminals
[TM201]
Transmission cable
through hole
POWER SUPPLY
L
N
Power supply
Earth (Ground)
terminal
terminal
1Ø 100-240V
Screw Size : M4
Screw Size : M4
51 31
External input function
▪
External input terminals:
Function which uses external input terminals to perform
the "Emergency stop" or "Batch start/batch stop" opera-
tion from the outside.
▪
External input contact
CH1 and CH2 of TM201 of the rear cover are switched
to "dry contact terminal" and "apply voltage terminal" by
connecting CN201 on the front cover PCB to CN411 or
CN412.
TM201- CH1, CH2
Dry contact terminal
Apply voltage terminal
*
:Factory setting
▪
Dry contact terminal
When a power supply is unnecessary at the input
device you want to connect, connect CN201 and
CN411.
CN411
CN412
[TM201]
EXTERNAL INPUT
TRANSMISSION
CH1
X1 X2
K1 K2 K1 K2
VRF ( L
W
)
ON
ORKS
Earth (Ground)
Transmission
terminal
terminal
Screw Size : M3
Screw Size : M3
External input
terminal
Screw Size : M3
Input method:
pulse
Connect with the CN201
CN411 *
CN412
CH2