Description
Model G10040 is an 18 volt battery operated, cordless grease gun suitable for 450gm grease cartridges or bulk grease
filling. It comes complete with a plastic carry case, a 240v quick battery charger and a spare extra battery. Capable of
developing up to 10,000psi, the G10040 can also deliver up to 80 grams of NLGI2 grease per minute. The gun comes
complete with a massive 106cm long high pressure flexible extension and hydraulic coupler to grease those difficult to
get to places. The G10040 can pump for up to 35 minutes or 4 x 450gm NLGI2 grease cartridges before requiring
battery changeover or recharge which takes only 75 minutes. For heavy duty applications where day in day out greasing
is required, the 670AN from Alemite USA is also available.
Specifications
Uses
Discharge Quantity
Grease Pressure
Battery
Weight
Operating instructions
1
Before using the gun for the first time, please ensure the battery has
been fully charged.
There are two ways to fill the gun with grease:
A) 450gm Grease Cartridge:
Unscrew the grease barrel from the gun and insert the 450gm grease
cartridge by holding the barrel assembly & pulling the rod back. Remove
both caps from the cartridge, insert the cartridge into the barrel & then
rescrew the barrel assembly back onto the gun so that the cartridge sits
well against the grease gun head. Once in position, press the clamp
down & push the rod back into the barrel.
Important to note
When using the gun with a cartridge, the follower cup must be folded
backwards. The gun is supplied standard with the follower cup in this
position.
B) Bulk Grease Loading:
Unscrew the grease barrel from the gun & insert the barrel into the bulk
grease. Suck the grease up into the barrel by pulling the rod all the way
back. When barrel is full with grease, rescrew the barrel assembly back
onto the gun so that the grease filter sits well against the grease. Press
the clamp down & push the rod back into the barrel.
Important to note
When using the gun with bulk grease, the follower cup must be folded
forward. To do this you have to take the follower cup and rod assembly
out of the barrel, fold the follower cup forward and reassemble the barrel
assembly.
2 Press the air release valve down until grease appears.
3 Pull the gun trigger until grease is forced out of the hydraulic coupler.
Head Office NSW
VIC
TEL: (02) 9939 0711
TEL: (03) 8787 8288
FAX: (02) 9939 0411
FAX: (03) 8787 8266
Visit our website at
EL SERIES
18V Battery Operated Cordless Grease Gun - 450gm grease cartridge or bulk grease fill
Up to 80 grams per minute of NLGI2 grease
Up to 10,000psi
1500mAh
7.9kg
QLD
TEL: (07) 3889 8480
FAX: (07) 3889 8490
www.alemlube.com.au
SERVICE INSTRUCTIONS
G10040 18V ordless Grease Gun
S /NT
TEL: (08) 8241 7111
FAX: (08) 8241 7011
W
T S
TEL: (08) 9209 3066
TEL: (03) 6343 0477
FAX: (08) 9209 3933
FAX: (03) 6343 0911
Печатать страницу